This is a Pico Wireless Control 3 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 3 button w/ raise/lower. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This the 2 button Pico wireless control w/ nightlight. Check out the RadioRA 2 products page here.

• Provides control for the following:
  • Maestro WirelessR controls
  • PowPakR Modules
  • Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM)
  • GRAFIK EyeR QS wireless systems
  • RadioRAR 2 systems
  • HomeWorksR QS wireless systems
  • CasetaT Wireless dimmers
• Battery-powered. Requires no wiring.

This is the Pico wireless control w/ nightlight – 3 button w/ raise/lower. Check out the RadioRA 2 products page here.

• Provides control for the following:
  • Maestro WirelessR controls
  • PowPakR Modules
  • Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM)
  • GRAFIK EyeR QS wireless systems
  • RadioRAR 2 systems
  • HomeWorksR QS wireless systems
  • CasetaT Wireless dimmers
• Battery-powered. Requires no wiring.

The PTS 60 and PTS 720 Series Electronic Auto Shut-off Timer Switches provide a simple to use and simple to apply lighting control alternative to wall switch occupancy sensors. These elegant decorator style wall stations each provide six preset countdown timer selections as well as an on/off push-button

• Self-Contained Relay
• Interchangeable Hot & Load Wires – Impossible to Wire Backwards
• No Neutral Connection Required
• Self-Grounding Mounting Strap
• No Minimum Load Requirement
• Push-Button Programmable w/o Removing Switch Plate
• Fixed or Adjustable Preset Times
• Optional Audible Timeout Warning at 45, 30, and 15 sec
• Optional Flicker Timeout Warning at 2 and 1 min
• Continuous LED Flash for Last 30 sec of Button’s Time Setting
• Green On/Off Switch Status LED
• Green LED Time Indicators

• The PTS 60 and PTS 720 Series Electronic Auto Shut-off Timer Switches provide a simple to use and simple to apply lighting control alternative to wall switch occupancy sensors. These elegant decorator style wall stations each provide six preset countdown timer selections as well as an on/off push-button
  • Self-Contained Relay
  • Interchangeable Hot & Load Wires – Impossible to Wire Backwards
  • No Neutral Connection Required
  • Self-Grounding Mounting Strap
  • No Minimum Load Requirement
  • Push-Button Programmable w/o Removing Switch Plate
  • Fixed or Adjustable Preset Times
  • Optional Audible Timeout Warning at 45, 30, and 15 sec
  • Optional Flicker Timeout Warning at 2 and 1 min
  • Continuous LED Flash for Last 30 sec of Button’s Time Setting
  • Green On/Off Switch Status LED
  • Green LED Time Indicators

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

This is the RadioRA 2 maestro local control remote switch. Check out the RadioRA 2 products page here.

• On a single-tap, lights or motors turn ON or OFF.
• Neutral and two-wire switches available.

This is the RadioRA 2 maestro local control remote switch. Check out the RadioRA 2 products page here.

• On a single-tap, lights or motors turn ON or OFF.
• Neutral and two-wire switches available.