This is the RadioRA 2 architectural RF GRAFIK T switch. RadioRA® 2 architectural RF GRAFIK T local controls function much like standard dimmers or switches, but can be operated as part of a lighting control system. GRAFIK T controls are useful in locations where single circuits of lighting need to be dimmed or switched. All Dimmers, Switches, and Accessories GRAFIK T dimmers and switches contain an Advanced Programming Mode (APM) that allows users to customize the control to meet their specific needs. Check out the RadioRA 2 products page here.

• Controls include dimmers, switches, and companion devices.
• Simple touch control.
• Distinctive architectural aesthetic.
• Softly lit white LEDs indicate light level and coordinate with any décor.
• Advanced microprocessor dimming technology for control of dimmable LED lamps.
• Low-end and high-end trim are available for improved LED dimming performance (dimmer only).
• Optional neutral connection available for superior LED dimming performance (C•L® dimmer only).
• Phase selectable technology allows forward or reverse phase dimming for compatibility with more load types.
• Installs in single-pole or multi-location applications. Companion devices are available for multi-location control with dimmers and switches (maximum 4 companion devices per dimmer or switch, 1 main control per circuit).
• Use Lutron® GRAFIK TTM wallplates (sold separately).
• Lutron® GRAFIK TTM wallplates snap on with no visible means of attachment.

This is the RadioRA 2 architectural RF GRAFIK T phase selectable dimmer. RadioRA® 2 architectural RF GRAFIK T local controls function much like standard dimmers or switches, but can be operated as part of a lighting control system. GRAFIK T controls are useful in locations where single circuits of lighting need to be dimmed or switched. All Dimmers, Switches, and Accessories GRAFIK T dimmers and switches contain an Advanced Programming Mode (APM) that allows users to customize the control to meet their specific needs. Check out the RadioRA 2 products page here.

• Controls include dimmers, switches, and companion devices.
• Simple touch control.
• Distinctive architectural aesthetic.
• Softly lit white LEDs indicate light level and coordinate with any décor.
• Advanced microprocessor dimming technology for control of dimmable LED lamps.
• Low-end and high-end trim are available for improved LED dimming performance (dimmer only).
• Optional neutral connection available for superior LED dimming performance (C•L® dimmer only).
• Phase selectable technology allows forward or reverse phase dimming for compatibility with more load types.
• Installs in single-pole or multi-location applications. Companion devices are available for multi-location control with dimmers and switches (maximum 4 companion devices per dimmer or switch, 1 main control per circuit).
• Use Lutron® GRAFIK TTM wallplates (sold separately).
• Lutron® GRAFIK TTM wallplates snap on with no visible means of attachment.

This is the GrafikT Dimming Keypad. Check out the RadioRA 2 products page here.

• Hybrid keypad allows for local control of load as well as typical keypad functionality.
• Hybrid keypad will function as a normal keypad when no load is installed or load burns out.
• Custom, backlit, engraved, scene / zone descriptions on faceplate.
• Dynamic Backlighting Management (DBM) automatically adjusts the intensity of the backlit engraving to ensure text is readable in any light.
• All buttons are fully programmable, including the raise / lower functionality.
• Available in 2,4,5,& 6 button.

This is the PIR wall switch vacancy sensor w/ NightLight. The RS-150BA-N Passive Infrared (PIR) Vacancy Sensor provides automatic shutoff for single-pole lighting control applications. It is engineered to comply with specific provisions of California’s Title 24-2013 energy code.

The RS-150BA-N operates as a manual-on sensor. Users must press the on/off pushbutton to turn on lighting. The RS-150BA-N employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a 30-minute time delay, when motion is no longer detected. Users may turn the lighting off manually.

The integral nightlight helps preserve night vision by providing low-level illumination when the connected lighting is off. The nightlight uses energy-efficient LEDs. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single-pole switches
• Fixed 30-minute time delay; no adjustment necessary
• Amber LED nightlight illuminates whenever connected load is off
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors; lens is color-matched todevice
• Operates most common types of lighting or fan motors
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• CA Title 24 compliant

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the PIR wall switch occupancy sensor. The RS-250 Passive Infrared (PIR) Occupancy Sensor provides automatic lighting shutoff for single-pole lighting control applications. It offers optional automatic lighting activation.

The RS-250 operates either as a manual- or automatic-on sensor. When in manual-on mode, users must press the pushbutton to turn on lighting. The RS-250 employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the lighting off manually.

When automatic-on operation has been selected, the adjustable light level sensor may be set to prevent lights from turning on automatically if sufficient daylight is present. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single-pole switches
• Adjustable time delay, 15 seconds to 30 minutes
• Lighted switch for visibility in darkened rooms
• If enabled, light level sensing prevents automatic-on when adequate daylight exists
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to device
• Operates most common types of lighting
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• Compliant with Nonresidential CA Title 24 requirements

This is the programmable countdown time switch. The RT-100 Programmable Countdown Time Switch automatically turns lighting or other loads off when the programmed on-time expires. It replaces standard single-pole wall switches for energy savings inside and outside.

Users turn connected lights on by pressing the on/off button, which activates the on-time programmed by the installer. If users want the lights to remain on for a different period of time, they simply press and hold the on/off button until the display shows the desired time. When the button is released, the lights will remain on for the newly selected on-time. After the time has elapsed, lighting is automatically turned off. Lights can be turned off before the countdown is complete by pressing the on/ off button.

The on-time can be programmed for 5 to 55 minutes (in 5-minute increments) or 1 to 12 hours (in 15-minute increments). It is typically set for the period of time the connected load normally needs to remain on. Other programming options include enabling or disabling audible and visible shutoff warnings. Check out Wattstopper DLM products here.

• Programmable countdown time switch
• Replaces single-pole switch
• Adjustable on-time from 5 minutes to 12 hours
• Optional audible beep and/or visible light flash warnings before automatic off
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors
• Operates most common types of lighting
• Relay-based switching
• Zero crossing reduces stress on the relay and increases product longevity
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates

This is the preset countdown time switch. The RT-50 Preset Countdown Time Switch automatically turns lighting or other loads off when the selected on-time expires. It replaces standard single-pole wall switches for energy savings throughout a range of applications.

Users press one of the six preset buttons to turn connected lighting on for the corresponding period of time. After the time has elapsed, lighting is automatically turned off. Lights can be turned off before the countdown is complete by pressing the on/ off button. Users may press the on/off button to turn lights on. The time switch will activate the preset that was last used, and the indicator light for that preset will turn on. To change the countdown, users press the desired preset button and the RT-50 will reset to that countdown interval.

The RT-50 will keep lighting on for 1, 5, 10, 20, 30 or 60 minutes. The digital on-time options provide precise control and help users avoid leaving lights on unnecessarily. Check out Wattstopper DLM products here.

• Seven-button preset time switch
• Replaces single-pole switch
• Selectable on-time: 1, 5, 10, 20, 30, 60 minutes
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors
• Operates most common types of lighting
• Relay-based switching
• Zero crossing reduces stress on the relay and increases product longevity
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates

This is the RadioRA 2 architectural RF GRAFIK T companion device. RadioRA® 2 architectural RF GRAFIK T local controls function much like standard dimmers or switches, but can be operated as part of a lighting control system. GRAFIK T controls are useful in locations where single circuits of lighting need to be dimmed or switched. All Dimmers, Switches, and Accessories GRAFIK T dimmers and switches contain an Advanced Programming Mode (APM) that allows users to customize the control to meet their specific needs. Check out the RadioRA 2 products page here.

• Controls include dimmers, switches, and companion devices.
• Simple touch control.
• Distinctive architectural aesthetic.
• Softly lit white LEDs indicate light level and coordinate with any décor.
• Advanced microprocessor dimming technology for control of dimmable LED lamps. 1
• Low-end and high-end trim are available for improved LED dimming performance (dimmer only).
• Optional neutral connection available for superior LED dimming performance (C•L® dimmer only). 2
• Phase selectable technology allows forward or reverse phase dimming for compatibility with more load types.
• Installs in single-pole or multi-location applications. Companion devices are available for multi-location control with dimmers and switches (maximum 4 companion devices per dimmer or switch, 1 main control per circuit).
• Use Lutron® GRAFIK TTM wallplates (sold separately). See the Colors and Finishes on page 3 for details.
• Lutron® GRAFIK TTM wallplates snap on with no visible means of attachment.

• 120/277V
• Paddle turns on/off
• Use with any 15A load
• General purpose switching of all sources and motor loads
• No derating if ganged

• 120V ONLY
• Paddle turns on/off
• Use with any 15A load
• General purpose switching of all sources and motor loads
• No derating if ganged

• 120/277V
• Paddle turns on/off
• Use with any 15A load
• General purpose switching of all sources and motor loads
• No derating if ganged

• 120V ONLY
• Paddle turns on/off
• Use with any 15A load
• General purpose switching of all sources and motor loads
• No derating if ganged