The PTS 60 and PTS 720 Series Electronic Auto Shut-off Timer Switches provide a simple to use and simple to apply lighting control alternative to wall switch occupancy sensors. These elegant decorator style wall stations each provide six preset countdown timer selections as well as an on/off push-button

• Self-Contained Relay
• Interchangeable Hot & Load Wires – Impossible to Wire Backwards
• No Neutral Connection Required
• Self-Grounding Mounting Strap
• No Minimum Load Requirement
• Push-Button Programmable w/o Removing Switch Plate
• Fixed or Adjustable Preset Times
• Optional Audible Timeout Warning at 45, 30, and 15 sec
• Optional Flicker Timeout Warning at 2 and 1 min
• Continuous LED Flash for Last 30 sec of Button’s Time Setting
• Green On/Off Switch Status LED
• Green LED Time Indicators

• The PTS 60 and PTS 720 Series Electronic Auto Shut-off Timer Switches provide a simple to use and simple to apply lighting control alternative to wall switch occupancy sensors. These elegant decorator style wall stations each provide six preset countdown timer selections as well as an on/off push-button
  • Self-Contained Relay
  • Interchangeable Hot & Load Wires – Impossible to Wire Backwards
  • No Neutral Connection Required
  • Self-Grounding Mounting Strap
  • No Minimum Load Requirement
  • Push-Button Programmable w/o Removing Switch Plate
  • Fixed or Adjustable Preset Times
  • Optional Audible Timeout Warning at 45, 30, and 15 sec
  • Optional Flicker Timeout Warning at 2 and 1 min
  • Continuous LED Flash for Last 30 sec of Button’s Time Setting
  • Green On/Off Switch Status LED
  • Green LED Time Indicators

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

• Provides control for the following Lutron products that incorporate a wired IR input:
  • Energi Savr Node units
  • QS Sensor Modules
  • EcoSystem ballasts or ballast modules
• Mounts easily in any single-gang wallbox
• Fits designer style Claro wallplates

This is the RadioRA 2 remote dimmer. Check out the RadioRA 2 products page here.

• RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on.
• RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASS) for safe lamp replacement.
• Use Lutron Designer (Claro or Satin Colors) wallplates or designer-style wallplates from other manufacturers.

This is the RadioRA 2 maestro local control remote switch. Check out the RadioRA 2 products page here.

• On a single-tap, lights or motors turn ON or OFF.
• Neutral and two-wire switches available.

This is the RadioRA 2 maestro local control remote switch. Check out the RadioRA 2 products page here.

• On a single-tap, lights or motors turn ON or OFF.
• Neutral and two-wire switches available.

This is the PIR multi-way wall switch occupancy sensor. The RH-250 Passive Infrared (PIR) Multi-way Occupancy Sensor provides automatic lighting shutoff for a variety of applications including those with multiple switch locations. It offers optional automatic lighting activation. The RH-250 operates either as a manual- or automatic-on sensor. When in manual-on mode, users must press the pushbutton to turn on lighting. The RH-250 employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the lighting off manually. When automatic-on operation has been selected, the adjustable light level sensor may be set to prevent lights from turning on automatically if sufficient daylight is present.

An RH-250 connected to other RH-250s and/or RH-253 Decorator Single Pole Momentary Switches provides true multi-way on/off control. An occupant simply presses the on/ off pushbutton of any connected device to turn on the lighting. Lights remain on as long as one of the RH-250s continues to detect occupancy. The user may turn off the lighting by pressing the on/off button on any of the connected devices. If the room becomes vacant and lights are on, they will be switched off automatically following the time delay of the last RH-250 to detect occupancy. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single- or multi-pole switches
• Provides multi-way control when used with other RH-250s or RH-253s
• Adjustable time delay, 15 seconds to 30 minutes
• Lighted switch for visibility in darkened rooms
• If enabled, light level sensing prevents automatic-on when adequate daylight exists
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to device
• Operates most common types of lighting
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• Compliant with Nonresidential CA Title 24 requirements

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the decorator single pole momentary switch. The RH-253 is a single pole momentary switch for on/off control. It is typically used with multi-way occupancy and vacancy sensors for applications requiring multiple switch locations. Users tap the switch to turn connected lighting on or off. The RH-253 provides true multi-way on/off control when connected to one or more CH-250, CU-250, CD-250, RH-250 or RD-250 wall switch sensors. Check out Wattstopper DLM products here.

• Replaces three-way or four-way switches when used with multi-way sensors
• Works with CH-250, CU-250 and RH-250 sensors and CD-250 and RD-250 sensor dimmers.
• Low-profile styling
• Choice of five decorator colors
• Compatible with decorator wall plates

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the RadioRA 2 RF plugin appliance module. RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect RF Technology. They can be hidden behind furniture or appliances. The RadioRA 2 Dimming Module (RR-3PD-1) functions much like standard lamp dimmers, but also incorporates advanced features such as fade on/fade off, delayed long fade off, and rapid full on. Check out the RadioRA 2 products page here.

• On a single-tap of the toggle button, load toggles ON or OFF.
• The appliance module may be used with, but is not limited to, the following: Task lighting or Humidifiers Note: Refer to the manufacturer’s guidelines for acceptable switching methods.
• The appliance module may NOT be suitable for use with devices that require any of the following: Shut-down process before power is interrupted, such as computers. Cool-down process before power is interrupted, such as projectors. Programming, such as clocks or DVRs. Long warm-up cycle.
• If an over-temperature condition is detected, the LED on the unit will flash a unique sequence (double-blink, then pause) and turn the load off. Proper installation and conformance to all specifications should be ensured before proceeding. To return the device to normal operation, cycle power to the device.