This is the ultrasonic ceiling sensor. Wattstopper’s W Series Ultrasonic Ceiling Sensors are versatile motion detectors that control lighting in a wide variety of applications. W Series Sensors can be used individually or as part of an integrated system of Wattstopper lighting control products.

The 24 VDC W Series Sensors utilize advanced omni-directional, ultrasonic technology to sense occupancy. When movement is detected in a controlled area, the W Series Sensors will switch lights on via low-voltage wiring through to a Wattstopper power or auxiliary pack. Once the area is vacated and the user adjustable time delay (15 seconds to 15 minutes) has elapsed, lighting systems automatically switch off. Check out Wattstopper DLM products here.

This is the low voltage PIR ceiling sensor. Wattstopper’s CI-300 Passive Infrared (PIR) Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensor mounts on the ceiling with a flat, low-profile appearance and provides 360 degrees of coverage.

CI-300 Series Sensors operate on 24 VDC, VAC or halfwave rectified. Utilizing the latest PIR technology, they automatically turn lighting on when a difference is detected between infrared energy from a human body in motion and the background space. When no occupancy is detected for the length of the time delay, lighting automatically turns off. For manual-on operation, the CI-300 will operate with a low-voltage momentary switch. Check out Wattstopper DLM products here.

360° up to 1200 ft2

This is the low voltage PIR ceiling sensor. Wattstopper’s CI-300 Passive Infrared (PIR) Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensor mounts on the ceiling with a flat, low-profile appearance and provides 360 degrees of coverage.

CI-300 Series Sensors operate on 24 VDC, VAC or halfwave rectified. Utilizing the latest PIR technology, they automatically turn lighting on when a difference is detected between infrared energy from a human body in motion and the background space. When no occupancy is detected for the length of the time delay, lighting automatically turns off. For manual-on operation, the CI-300 will operate with a low-voltage momentary switch. Check out Wattstopper DLM products here.

360° up to 500 ft2

The WattStopper CS-350-N Passive Infrared (PIR) Dual Relay Vacancy Sensor provides automatic lighting shutoff for applications that require separate switching of two loads. It is engineered to comply with specific provisions of California’s Title 24-2013 energy code. The CS-350-N operates as a manual-on sensor. Users must press one or both of the on/off pushbuttons to turn on the connected loads. The CS-350-N employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. Also, the sensor keeps loads on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the connected loads off manually. The integral nightlight helps preserve night vision by providing low-level illumination when the connected loads are off. The nightlight uses energy-efficient LEDs.

Features

• Complies with 2011 NEC requirements
• Replaces standard switches for control of lighting and/or fans
• Contains two relays to control two independent lighting loads or circuits
• Adjustable time delay, 15 seconds to 30 minutes
• Amber LED nightlight turns on whenever connected loads are off
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to the device
• Operates most common types of lighting or fan motors
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• CA Title 24 compliant

For other items like the WattStopper CS-350-N PIR Dual Relay Sensor click here.

For more information on WattStopper’s line of lighting control solutions click here.

Wattstopper DW-100 DUAL TECHNOLOGY WALL SWITCH. This is the dual technology wall switch sensor. The DW-100 dual technology wall switch sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies, and can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.

The DW-100 fits in a single gang junction box. Once the lights are ON, detection by either technology holds lights ON until occupancy is no longer detected and the time delay elapses. DIP switch settings allow for a variety of control options including Auto-ON operation, walk-through and test mode. By default, Auto-ON turns lighting on when both PIR and ultrasonic technologies detect occupancy. Additional DIP switch settings allow the user to choose which sensing technologies turn ON and hold ON the lighting.

Features

• Complies with 2011 NEC requirements
• Detection Signature Processing eliminates false triggers and
provides immunity to RFI and EMI
• Zero-crossing for long relay life
• Vandal resistant lens combines precise coverage with durability
• Choice of Manual-ON or Auto-ON operation
• Selectable walk-through mode turns lights off three minutes
after the room is initially occupied if no motion is detected
after the first 30 seconds
• Test mode allows quick and easy adjustments
• Selectable audible alert for impending shutoff
• In automatic mode, sensor returns automatically to Auto-ON
after lights are turned off manually; ideal for presentations
• Four occupancy logic options give users the ability to
customize control to meet application needs
• Optional light level sensing with simple setup
• Service mode allows sensor to operate as a service switch in
the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates
• BAA/TAA-compliant models available

For other items like the Wattstopper DW-100 DUAL TECHNOLOGY WALL SWITCH click here.

For more information on Wattstopper’s line of lighting solutions click here.

Wattstopper DW-200 DUAL TECHNOLOGY DUAL RELAY WALL SWITCH. This is the dual technology wall switch sensor w/ 2-relays. The DW-200 dual technology wall switch sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies to turn lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits and a variety of features.

The DW-200 fits in a single gang junction box. Each of the DW-200’s relays can control a separate lighting load. By default, when both PIR and ultrasonic technologies detect occupancy, relay 1 turns ON automatically. Detection by either technology holds lights ON. When occupancy is no longer detected and the time delay elapses, lights automatically turn OFF. Dual ON/OFF buttons allow the user to manually turn on and off each of the loads. DIP switch settings allow for a variety of control options such as Auto-ON or Manual-ON for each relay, walk-through, and test mode.

Features

• Complies with 2011 NEC requirements
• Detection Signature Processing eliminates false triggers and
provides immunity to RFI and EMI
• Zero-crossing on both relays for long relay life
• Vandal resistant lens combines precise coverage with
durability
• Choice of Manual-ON or Auto-ON operation, selectable for
each relay
• Selectable walk-through mode turns lights off three minutes
after the room is initially occupied if no motion is detected
after the first 30 seconds
• Test mode allows quick and easy adjustments
• Selectable audible alert for impending shutoff
• In automatic mode, sensor returns automatically to Auto-ON
after lights are turned off manually; ideal for presentations
• Four occupancy logic options give users the ability to
customize control to meet application needs
• Optional light level sensing with simple setup
• Service mode allows sensor to operate as a service switch in
the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates
• BAA/TAA-compliant models available

For other items like the Wattstopper DW-200 DUAL TECHNOLOGY DUAL RELAY WALL SWITCH click here.

For more information on Wattstopper’s line of lighting solutions click here.

This is the wireless RF PIR occupancy sensor. The EOPC-100 Wireless RF PIR Occupancy Sensor works with EOSW-100 Series RF Wall Switches to turn lights on and off based on occupancy. The sensor mounts on the ceiling and provides 360° passive infrared coverage. EOPC-100 wireless sensors operate on power supplied by two photovoltaic panels capable of reaching a full charge in 6 hours when the ambient light level is 20 footcandles (215 lux). Each sensor can be paired with multiple loads controlled by RF wall switches. Paired loads configured for automatic-on operation turn on when a sensor transmits an RF signal that it has detected occupancy. As long as the sensor detects occupany it continues transmitting signals to the paired wall switch receivers. All paired loads turn off when no occupancy has been detected for the duration of the selected time delay. Check out Wattstopper DLM products here.

• Wireless RF occupancy sensors work with EOSW-100 Series RF wall switches
• Detection Signature Processing to eliminate false triggers and provide immunity to RFI and EMI
• Trimpot for sensitivity adjustment
• Test mode allows quick and easy set up
• Includes plate for mounting to single- or double-gang junction boxes or ceiling tile
• Reversible magnetic/adhesive disc for surface mounting
• Sensor coverage tested to NEMA Guide Publication WD 7-2000

WattStopper LMDC-100 DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR. The LMDC-100 low profile Dual Technology Ceiling Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system.

The LMDC-100 operates on Class 2 power supplied to a DLM
local network by one or more DLM room controllers. It works
with the room controller(s) to turn loads on and off based on
occupancy. Default operation is established by Plug n’ Go, which
automatically configures system components to maximize
energy savings. Initially, all occupancy sensors control all loads
on the same local network. Each LMDC-100 may be assigned
to a specific load; load assignments and load parameters
may be changed using Push n’ Learn. The LMDC-100 may be
reconfigured either using the pushbuttons and an LCD screen
conveniently located behind the snap-off front sensor cover, or
with a wireless configuration tool.

Features

Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a
free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
• 360 degree PIR coverage
• Detection Signature Processing eliminates false triggers and
provides immunity to RFI and EMI
• The product meets the materials restrictions of RoHS
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• BAA/TAA-compliant models available

Specifications

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a
free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
• 360 degree PIR coverage
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• The product meets the materials restrictions of RoHS
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• BAA/TAA-compliant models available

For other items like the WattStopper LMDC-100 DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMDM 101 DIMMING WALL SWITCH. This is the dimming wall switch. The LMDM-101 Dimming Wall Switch is a low voltage device for dimming control of one or more lighting loads. It is part of a Digital Lighting Management (DLM) system and can dim load(s) connected to DLM dimming room controllers and switch load(s) connected to DLM on/off room controllers. Check out Wattstopper DLM products here.

FEATURES:

• Hidden configuration button for easy access to Push n’ Learn
• Used with DLM dimming room controller
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Provides full function dimming control in multi-way applications, such as 3-way, 4-way, and beyond
• Infrared (IR) transceiver for wireless configuration and control
• LED status indicator
• Sleek single gang device fits decorator wall plates
• Six color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• Control button with LED status indicator
• 7-LED dimming level indicator
• Hidden configuration button for access to Push n’Learn mode
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMDM 101 DIMMING WALL SWITCH click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR. The LMLS-600 is a dual loop photosensor that automatically switches or dims one zone of lighting based on ambient light and daylight levels. It has two silicon photodiodes with an extended range of 1–10,000 footcandles (fc) and features photopic correction to mimic the human eye’s perception of daylight. The LMLS-600 is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers.

Features

• Can be calibrated in any daylight condition
• Test Mode override of programmed time delay allows easy verification of selected settings
• Infrared (IR) transceiver for wireless configuration and control
• Recalibrates every night to account for reflectance changes within the space
• Compatible with DLM wall switches for manual override, if desired
• LED status indicators
• RJ45 jack for connection to free-topology Cat 5e DLM local network
• Complies with California Title 24, Section 119 requirements
• The product meets the materials restrictions of RoHS

Specifications

• Input voltage: 24 VDC from DLM local network
• Current consumption: 7 mA
• DLM local network connection: 1 RJ45 port
• Digital multi-band photosensor range: 1–10,000 fc (10–107,000 lux)
• Spatial response:
– Closed loop, selectable 70º or 30º
– Open loop, 60º
• LED status and configuration indicators
• Infrared (IR) transceiver
• Weight: 1.1 oz (31 g)
• Operating conditions: for indoor use only; 32–131ºF (0–55ºC); less than 90% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMPS-104 PARTITION SWITCH. The LMPS-104 Partition Switch enables quick manual coordination of lighting controls in flexible spaces with up to four movable walls. It is part of a Digital Lighting Management (DLM) system, and can reconfigure connected switches and
occupancy sensors. The LMPS-104 may also be used as a status indicator when an LMIO-102 Digital Partition Interface is used for automatic coordination of controls.

The LMPS-104 operates on Class 2 power supplied to a DLM local network by one or more room controllers. Prior to operation, the user must establish load profiles for each possible configuration of the space, with up to four walls open and closed. Up to 16 load profiles may be configured using Push n’ Learn or other DLM configuration tools. When the walls in the controlled space are all closed, the user must toggle the
buttons so that all of the LEDs are on. When the controlled space is set up for a new function, the user toggles the buttons associated with each wall that has been opened so that the LED is off. Each different button combination recalls one of the 16 load profiles.

Features

• Hidden configuration button for easy access to Push n’ Learn™
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang device fits decorator wall plates
• Each button represents one wall; LED indicates status (open or closed)
• Five color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Benefits

Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• 4 control buttons, each with LED status indicator
• Hidden configuration button to access Push n’ Learn
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper CS-350-N PIR Dual Relay Sensor click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMPW-100 PIR WALL SWITCH OCCUPANCY SENSORS. LMPW-100 Series PIR Wall Switch Occupancy Sensors use passive infrared (PIR) technology to detect occupancy for energy-efficient control of lighting and plug loads. They also include one or two switch buttons for manual control of selected loads, and are part of a Wattstopper Digital Lighting Management (DLM) system.

Features

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1- and 2-button models; six color options
• Sensors may be used for multi-way control
• Each switch button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to raise or lower load levels
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS

Specifications

• Input voltage: 24VDC from DLM network
• Current consumption: 8mA
• DLM local network connection: 2 RJ45 ports
• 1 or 2 switch buttons, each with LED status indicator
• Scrolling LCD display and pushbuttons for setting sensor and system parameters
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMPW-100 PIR WALL SWITCH OCCUPANCY SENSORS click here.

For more information on WattStopper’s line of lighting control solutions click here.