WattStopper LMUC-100-2 ULTRASONIC CEILING MOUNT OCCUPANCY SENSOR. The LMUC-100 low profile Digital Ultrasonic Ceiling Mount Occupancy Sensor uses ultrasonic diffusion technology to
achieve 360° occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system.

Features

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider
area (patented); 40KHz signal
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM network
• Current consumption: 20mA
• DLM local network connection: 2 RJ45 ports
• LCD display and pushbuttons for setting sensor and system parameters
• Infrared (IR) transceiver
• Ultrasonic frequency: 40 kHz
• Coverage: Major motion, 1,000 ft2 (93 m2) Minor motion, 450 ft2 (42 m2)
• Operating conditions: for indoor use only; 32-104°F (0-40°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMUC-100-2 ULTRASONIC CEILING MOUNT OCCUPANCY SENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.

This is the Wattstopper zone controller. The LMZC zone controller provides power and connectivity to Digital Lighting Management (DLM) fixture controllers as well as switches, occupancy sensors, daylight sensors, and input modules. It is the foundation of a DLM local network for fixture controllers, and includes integral segment network connectivity. The zone controller can be used to enable the automation of lighting functions across a facility. Check out Wattstopper DLM products here.

FEATURES:

• Two free-topology DLM Category 5e local networks for DLM load controllers, sensors, switches, and LMIO series input modules
• Supports up to 94 DLM communicating devices and up to 64 connected loads
• LMCT-100 handheld configuration tool recommended for setup
• Runs event-based schedule routines independently (does not require BAS or Segment Manager)
• Supports astronomical, time-based, and photocell-based event types
• This product meets the materials restrictions of RoHS

WattStopper LP8S-4-115 – LP8 PEANUT PANEL W/ 4 RELAYS. This is the LP8 peanut panel w/ 4 relays. WattStopper’s LP8 Peanut Lighting Control Panels provide simple, effective zone-based control of exterior and interior lighting in small applications. Panels control up to eight channels or zones of lighting. Zones respond to control signals from the system clock (or other signaling device) to turn lighting on and off. LP8 Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub and cover. The standard enclosure is NEMA 1-rated.

Features

• Preprogrammed control scenarios; seven-day format with holiday scheduling, astronomic control and automatic daylight savings
• Time retained during power outage; nonvolatile program memory
• Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other devices to directly control each relay
• Pushbuttons for manual override of each relay
• Uses individually replaceable HDR5P Mechanically Latching Relay with integral manual override
• Optional group of eight switch inputs for pushbutton grouping of relays (Smartwiring™)
• LED for visual indication of relay status
• Accepts most types of switch inputs
• Separate high voltage and low voltage sections for user protection

Specifications

• Multiple power supplies available: 115/277
VAC, 220-240 VAC, 115/347 VAC; 50/60 Hz
• Relay: Mechanically latching Integral manual override Individually replaceable
UL 20 listed for receptacle circuit control
Ratings: 20 Amp tungsten @ 120 VAC
30 Amp ballast @ 277 VAC
20 Amp ballast @ 347 VAC
30 Amp resistive @ 347 VAC
1.5 hp @ 120 VAC
• Accessory power 800 mA at 24 VDC/VAC/VACR
• Eight universal switch inputs; compatible with 3-wire momentary or maintained, 2-wire momentary or maintained, or 24 VDC input
• Eight universal group switch inputs that allow pushbutton grouping of relays (optional)
• Ambient temperature 32-139°F (0-60°C); 5-95% RH non-condensing
• Dimensions: 15.08” x 16.5” x 4.62” (383.0mm x 419.1mm x 117.3mm) L x W x D
• UL and cUL listed; one-year warranty

For other items like the WattStopper LP8S-4-115 LP8 PEANUT PANEL W/ 4 RELAYS click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LP8S-8-115 LP8 PEANUT PANEL W/ 8 RELAYS. This is the LP8 peanut panel w/ 8 relays. WattStopper’s LP8 Peanut Lighting Control Panels provide simple, effective zone-based control of exterior and interior lighting in small applications. Panels control up to eight channels or zones of lighting. Zones respond to control signals from the system clock (or other signaling device) to turn lighting on and off. LP8 Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub and cover. The standard enclosure is NEMA 1-rated.

Features

• Preprogrammed control scenarios; seven-day format with holiday scheduling, astronomic control and automatic daylight savings
• Time retained during power outage; nonvolatile program memory
• Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other devices to directly control each relay
• Pushbuttons for manual override of each relay
• Uses individually replaceable HDR5P Mechanically Latching Relay with integral manual override
• Optional group of eight switch inputs for pushbutton grouping of relays (Smartwiring™)
• LED for visual indication of relay status
• Accepts most types of switch inputs
• Separate high voltage and low voltage sections for user protection

For other items like the WattStopper LP8S-8-115 LP8 PEANUT PANEL W/ 8 RELAYS click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LP8S-8-G-115 LP8 PEANUT PANEL W/ 8 RELAYS GROUP CARD. This is the LP8 peanut panel w/ 8 relays & group card. WattStopper’s LP8 Peanut Lighting Control Panels provide simple, effective zone-based control of exterior and interior lighting in small applications. Panels control up to eight channels or zones of lighting. Zones respond to control signals from the system clock (or other signaling device) to turn lighting on and off. LP8 Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub and cover. The standard enclosure is NEMA 1-rated.

Features

• Preprogrammed control scenarios; seven-day format with holiday scheduling, astronomic control and automatic daylight savings
• Time retained during power outage; nonvolatile program memory
• Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other devices to directly control each relay
• Pushbuttons for manual override of each relay
• Uses individually replaceable HDR5P Mechanically Latching Relay with integral manual override
• Optional group of eight switch inputs for pushbutton grouping of relays (Smartwiring™)
• LED for visual indication of relay status
• Accepts most types of switch inputs
• Separate high voltage and low voltage sections for user protection

Specifications

• Multiple power supplies available: 115/277 VAC, 220-240 VAC, 115/347 VAC; 50/60 Hz
• Relay: Mechanically latching
Integral manual override Individually replaceable
UL 20 listed for receptacle circuit control
Ratings: 20 Amp tungsten @ 120 VAC
30 Amp ballast @ 277 VAC
20 Amp ballast @ 347 VAC
30 Amp resistive @ 347 VAC
1.5 hp @ 120 VAC
• Accessory power 800 mA at 24 VDC/VAC/VACR
• Eight universal switch inputs; compatible with 3-wire momentary or maintained, 2-wire momentary or maintained, or 24 VDC input
• Eight universal group switch inputs that allow pushbutton grouping of relays (optional)
• Ambient temperature 32-139°F (0-60°C); 5-95% RH non-condensing
• Dimensions: 15.08” x 16.5” x 4.62” (383.0mm x 419.1mm x 117.3mm) L x W x D
• UL and cUL listed; one-year warranty

For other items like the WattStopper LP8S-8-G-115 LP8 PEANUT PANEL W/ 8 RELAYS GROUP CARD click here.

For more information on WattStopper’s line of lighting control solutions click here.

This is the sensor mounting bracket. The MB-1 is a durable mounting bracket used to install occupancy sensors in a variety of settings. This bracket includes an adjustable plate that allows sensor rotation to achieve the desired angle for optimal coverage. The bracket also includes a built-in bubble level that affords the installer a reliable guide to ensure the bracket is correctly positioned before adjusting the sensor. The MB-1 is constructed of aluminum with a clear powder coating finish. Check out Wattstopper DLM products here.

This is the sensor mounting bracket. The MB-2 is durable mounting bracket used to install occupancy sensors in a variety of settings. This brackets includes an adjustable plate that allows sensor rotation to achieve the desired angle for optimal coverage. The bracket also includes a built-in bubble level that afford the installer a reliable guide to ensure the bracket is correctly positioned before adjusting the sensor. The MB-2 is constructed of aluminum with a clear powder coating finish. Check out Wattstopper DLM products here.

WattStopper RD-200-W PASSIVE INFRARED (PIR) DIMMING WALL SWITCH VACANCY SENSOR. This is the Passive Infrared (PIR) Dimming Wall Switch Vacancy Sensor. The RD-200 PIR Dimming Wall Switch Vacancy Sensor provides preset dimming control and occupancy-based automatic lighting shutoff for applications throughout the home. The RD-200 can dim incandescent loads from a minimum level of 10% to a maximum level of 100%. When the pushbutton is pressed and held, the RD-200 will ramp the lights up and down in a continuous cycle until the pushbutton is released. The dimming direction may be reversed by momentarily releasing the pushbutton and then pressing it again.

• Replaces standard single pole switch or incandescent dimmer
• Low-profile styling
• Choice of four decorator colors; lens is color matched to device
• Includes matching single-gang wall plate
• Lighted pushbutton for visibility in darkened rooms
• Manual-on or automatic-on operation
• Adjustable time delay from 15 seconds to 30 minutes
• Soft start technology to prolong lamp life
• Air gap isolation switch for safe re-lamping
• If enabled, light level sensing prevents automatic-on when adequate daylight exists

For other items like the WattStopper RD-200-W PASSIVE INFRARED (PIR) DIMMING WALL SWITCH VACANCY SENSOR click here.

For more information on Wattstopper’s line of lighting solutions click here.

CHECK OUT THIS CASE STUDY

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

Wattstopper UT-305-X ULTRASONIC CEILING SENSOR. This is the ultrasonic low voltage ceiling sensor. Wattstopper’s UT-300 Ultrasonic Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensors mount on the ceiling with a flat, unobtrusive appearance and provides 360° coverage.

UT-300 Series Sensors operate on 24 VDC, VAC or halfwave rectified. They use 40 KHz high frequency ultrasound to sense occupancy and automatically turn lighting on. When no occupancy is detected for the length of the time delay, lighting automatically turns off. For manual-on operation, the units work with a low-voltage momentary switch.

Features

• Advanced control logic based on RISC microcontroller
provides:
– Advanced Signal Processing eliminates false triggers and
provides immunity to RFI and EMI
– Walk-through mode turns lights off three minutes after
the area is initially occupied – ideal for brief visits such as
mail delivery
• LED indicates occupancy detection
• Coverage 500-2,000 square feet
• Available with isolated relay for integration with BAS or HVAC
• DIP switch simplifies sensor adjustments
• Patented ultrasonic diffusion technology spreads coverage to
a wider area
• UT-300 Series Sensors work with low-voltage momentary
switches for manual control
• Clip mounting system makes ceiling tile installation simple
• Uses plug terminal wiring system for quick and easy
installation
• BAA/TAA-compliant models available
• Sensor coverage tested to NEMA Guide Publication WD 7-2000

Specifications

• 24 VDC/VAC
• Time delays: 5, 10, 15, 20 or 30 minutes, Walk-through/
Test Modes
• Sensitivity adjustment: variable with trimpot
• Ultrasonic frequency: 40 kHz
• UT-300 contains isolated relay with N/O and N/C outputs;
rated for 1 Amp at 30 VDC/VAC
• Mounting options: ceiling tile; 4” square junction box with
double-gang mud ring
• Max. UT-300s per power pack: B=2, BZ=3
Max. UT-305s per power pack: B=3, BZ=4
• Dimensions: 4.5” x 1” (114.3mm x 25.9mm) diameter x depth
• UL and cUL listed
• Five year warranty

For other items like the Wattstopper UT-305-X ULTRASONIC CEILING SENSOR click here.

For more information on Wattstopper’s line of lighting solutions click here.

The WattStopper DT-305 Ceiling Sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies to detect occupancy and reduce false triggers. Sensors have a flat, unobtrusive appearance and provide 360 degrees of coverage. They easily mount to ceiling tiles or junction boxes. Ideal applications include classrooms, open office spaces, large offices, and computer rooms.

These WattStopper sensors use power packs for auto-on/off or low voltage switches for manual-on (both sold separately). In addition, the DT-300 family of sensors easily field modify to trigger lights on when either technology or both detect occupancy, or to require both technologies to hold lighting on. Once lights are on, detection by either technology holds them on. Lights turn off when occupancy is not detected for the length of the specified time delay.

• Sensors work with low-voltage momentary switches to provide manual control
• Patented ultrasonic diffusion technology spreads coverage to a wider area
• LEDs indicate occupancy detection
• Uses plug terminal wiring system for quick and easy
• Eight occupancy logic options provide the ability to customize
• Available with isolated relay for integration with BAS or HVAC
• BAA/TAA-compliant models available

PIR vs. Ultrasonic

PIR technology senses motion via a change in infrared energy within the controlled area. Ultrasonic uses 40KHz high frequency ultrasound.

Click here to shop other items compatible with the WattStopper DT-305 ceiling sensor or click here for a helpful video.

Do you need an option we don’t have listed on our site? Call us or chat with us for a quote!

This is the passive infrared ceiling sensor. Wattstopper’s WPIR Sensor is a versatile ceiling-mount sensor that utilizes the latest passive infrared (PIR) technology to turn lights on and off based on occupancy. The WPIR controls lighting in a wide variety of applications, but is especially adept at controlling small spaces with well-defined coverage.

The WPIR Ceiling Sensor utilizes the latest PIR technology to detect the difference between the infrared energy from a person in motion and the background space within the controlled area. When occupancy is detected, this 24 VDC sensor turns lighting or HVAC systems on through a Wattstopper power pack controlled through low voltage wiring. When occupants leave the area, lighting is switched off after the user-adjustable time delay has elapsed. Check out Wattstopper DLM products here.

WattStopper WRC-15/20 AMP WIRELESS RECEPTACLE CONTROL. Wireless Receptacle Control products facilitate Auto-On/AutoOff occupancy-based control of plug loads without the need to wire receptacles to power packs. A WRC transmitter works with WRC RF-enabled relay-controlled receptacles.

The 24VDC WRC-TX is wired to an occupancy sensor and a power pack to transmit On/Off signals to bound receptacles. A relay in each WRC receptacle switches the controlled outlet(s)
in response to the transmission. One transmitter can be bound
to up to 16 WRC receptacles, each with one or two controlled
outlets. In addition, each WRC receptacle has feed thru capability for downstream control of additional outlets.

Features

RF Transmitter (WRC-TX)
• Works with all 24VDC Wattstopper occupancy sensors and power packs
• Two mounting options for convenient installation in acoustic tile or to other surfaces
• Operates in quiet 915 MHz band to avoid interference
• LED indicator communicates status during binding
• The product meets the materials restrictions of RoHS RF

Receptacles (WRC Series)
• Choice of 15A or 20A rating
• Duplex receptacles with a choice of one or two controlled outlets
• Labeling meets NEMA requirements for controlled receptacles
• LED indicator communicates status during binding
• The product meets the materials restrictions of RoHS

Specifications

RF Transmitter
• Operating voltage: 24VDC
• Current consumption: 3mA
• Mounts to acoustic tile or other surface via keyhole mounting
• FCC Part 15 compliant Controlled Receptacles
• Operating voltage: 125VAC
• Load rating: 15A (WRC-15) or 20A (WRC-20)
• Auto ground strap construction
• Terminals for power feed-thru

RF System (Transmitter and Receptacles)
• NEMA-approved labeling for controlled receptacles
• Frequency: 915 MHz band
• Communication range: 30’ in obstructed application; up to 150’ with clear line of sight
• One transmitter can bind to up to 16 controlled duplex receptacles
• Operating conditions; for indoor use only
• UL and cUL listed
• Five year warranty

For other items like the WattStopper WRC-15/20 AMP WIRELESS RECEPTACLE CONTROL click here.

For more information on WattStopper’s line of lighting control solutions click here.