WattStopper LMIO-101 INPUT/OUTPUT INTERFACE. The LMIO-101 Input/Output Interface allows seamless integration with third party devices to provide additional functionality in a Digital Lighting Management (DLM) system. The LMIO-101 operates on power from the DLM local network. It contains a 24VDC isolated relay (single-pole, double throw with normally open (N/O), normally closed (N/C), and common outputs) for output to other systems. The isolated relay can
respond to any DLM occupancy sensor on the DLM local network. The LMIO-101 also includes a 24VDC output and four input terminals for maintained or momentary switch closure inputs, or third party logic inputs. Input signals may come from a wide variety of devices including building automation systems, time clocks and key switches, for purposes including hold-on/ hold-off, load shedding and cleaning. The LMIO-101 has DIP switch-selectable profiles to allow different combinations of
input signals to control different loads.

Features

• Plug n’ Go™ configuration for quick and easy startup out of the box
• Push n’ Learn™ functionality for personalizing system
settings to accommodate application needs
• Self-contained switching power supply and relay system
• Five status LEDs and configuration LED
• Hold-on/hold-off, occupancy sensor, time clock, load shed, cleaning switch and key switch modes available through DIP switch configurations
• Over-current protection
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

Input/output voltage: 24VDC from DLM network
• Maximum current consumption: 20mA
• DLM local network connection: 2 RJ45 ports
• Removable terminal block for connections to isolated relay output and third party inputs
• Isolated relay ratings:
– 24VDC/VAC, 1A, SPDT
– Normally open (N/O), normally closed (N/C) and common outputs
– Duplicates the functionality of the LMRL-100
• Input ratings:
– Input max. sink/source current: 1- 5 mA
– Logic input signal voltage High: >18 VDC
– Logic input signal voltage Low: < 2 VDC
• Operating conditions; for indoor use only; 32-131°F (0-55°C)
• Fits inside 4” x 4” j-box, 1 gang back box or 3” octagonal box; optional DIN rail mounting
• UL and cUL listed
• Five year warranty

For other items like the WattStopper LMIO-101 INPUT/OUTPUT INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMIO-102 PARTITION INTERFACE. The LMIO-102 Partition Interface automatically coordinates lighting controls in flexible spaces with up to four movable walls equipped with contact closures. It is part of a Digital Lighting Management (DLM) system, and can reconfigure connected switches and occupancy sensors.

Features

• Push n’ Learn™ functionality for personalizing system settings to accommodate application needs
• Four status LEDs indicate if walls are open or closed
• Two RJ45 ports with hinged dust cover
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM local network
• Current consumption: 20mA
• DLM local network connection: 2 RJ45 ports
• Removable terminal block for connections to third party contact closure inputs
• Input ratings:
– Input max. sink/source current: 1- 5 mA
– Logic input signal voltage High: >18 VDC
– Logic input signal voltage Low: < 2 VDC
• Operating conditions: for indoor use only; 32-104°F (0-40°C)
• Fits inside 4” x 4” j-box, 1 gang back box or 3” or 4” octagonal box; optional DIN rail mounting
• UL and cUL listed
• Five year warranty

For other items like the WattStopper LMIO-102 PARTITION INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR. The LMLS-600 is a dual loop photosensor that automatically switches or dims one zone of lighting based on ambient light and daylight levels. It has two silicon photodiodes with an extended range of 1–10,000 footcandles (fc) and features photopic correction to mimic the human eye’s perception of daylight. The LMLS-600 is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers.

Features

• Can be calibrated in any daylight condition
• Test Mode override of programmed time delay allows easy verification of selected settings
• Infrared (IR) transceiver for wireless configuration and control
• Recalibrates every night to account for reflectance changes within the space
• Compatible with DLM wall switches for manual override, if desired
• LED status indicators
• RJ45 jack for connection to free-topology Cat 5e DLM local network
• Complies with California Title 24, Section 119 requirements
• The product meets the materials restrictions of RoHS

Specifications

• Input voltage: 24 VDC from DLM local network
• Current consumption: 7 mA
• DLM local network connection: 1 RJ45 port
• Digital multi-band photosensor range: 1–10,000 fc (10–107,000 lux)
• Spatial response:
– Closed loop, selectable 70º or 30º
– Open loop, 60º
• LED status and configuration indicators
• Infrared (IR) transceiver
• Weight: 1.1 oz (31 g)
• Operating conditions: for indoor use only; 32–131ºF (0–55ºC); less than 90% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.

This is the plug load controller. LMPL-201 Plug Load Controllers include a 20-amp relay for on/ off control of connected outlets, and a high-efficiency switching power supply. They are part of a Wattstopper Digital Lighting Management (DLM) system, and enable energy-efficient control of plug loads. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Load On/Off local override button
• LED indicates status of connected load
• Integral current monitoring of connected load
• 4 RJ45 ports with integral strain relief and hinged dust cover
• Zero-crossing circuitry for reliability and increased product life
• UL2043 plenum rated
• Ships with “Sensor Controlled” labels for connected outlets
• The product meets the materials restrictions of RoHS

WattStopper LMPS-104 PARTITION SWITCH. The LMPS-104 Partition Switch enables quick manual coordination of lighting controls in flexible spaces with up to four movable walls. It is part of a Digital Lighting Management (DLM) system, and can reconfigure connected switches and
occupancy sensors. The LMPS-104 may also be used as a status indicator when an LMIO-102 Digital Partition Interface is used for automatic coordination of controls.

The LMPS-104 operates on Class 2 power supplied to a DLM local network by one or more room controllers. Prior to operation, the user must establish load profiles for each possible configuration of the space, with up to four walls open and closed. Up to 16 load profiles may be configured using Push n’ Learn or other DLM configuration tools. When the walls in the controlled space are all closed, the user must toggle the
buttons so that all of the LEDs are on. When the controlled space is set up for a new function, the user toggles the buttons associated with each wall that has been opened so that the LED is off. Each different button combination recalls one of the 16 load profiles.

Features

• Hidden configuration button for easy access to Push n’ Learn™
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang device fits decorator wall plates
• Each button represents one wall; LED indicates status (open or closed)
• Five color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Benefits

Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• 4 control buttons, each with LED status indicator
• Hidden configuration button to access Push n’ Learn
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper CS-350-N PIR Dual Relay Sensor click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMPW-100 PIR WALL SWITCH OCCUPANCY SENSORS. LMPW-100 Series PIR Wall Switch Occupancy Sensors use passive infrared (PIR) technology to detect occupancy for energy-efficient control of lighting and plug loads. They also include one or two switch buttons for manual control of selected loads, and are part of a Wattstopper Digital Lighting Management (DLM) system.

Features

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1- and 2-button models; six color options
• Sensors may be used for multi-way control
• Each switch button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to raise or lower load levels
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS

Specifications

• Input voltage: 24VDC from DLM network
• Current consumption: 8mA
• DLM local network connection: 2 RJ45 ports
• 1 or 2 switch buttons, each with LED status indicator
• Scrolling LCD display and pushbuttons for setting sensor and system parameters
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMPW-100 PIR WALL SWITCH OCCUPANCY SENSORS click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER. LMRC-100 Series Digital Room Controllers include one or two relay(s) for on/off control of a total of 20 amps, and a high-efficiency switching power supply. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting
sensors and switches for energy-efficient lighting control. LMRC-100 Series Room Controllers operate on one 120 or 277 volt, 20 amp, feed and provide Class 2 power to sensors and switches via the DLM local network. Once powered up, Plug n’ Go automatically configures system components for the most energy-efficient operation. The room controllers then switch lighting or motor loads on and off in response to input from the communicating devices. The DLM system may be reconfigured using Push n’ Learn without the need for tools or a PC.

Features

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• On/Off button for each load

• 3 RJ45 ports with integral strain relief and hinged dust cover
• Zero-crossing circuitry for each relay for reliability and increased product life
• Attach to standard electrical box through ½” knockout; UL2043 plenum rated
• RoHS compliant

Specifications

• Input/ouput voltage: 120/277VAC, 50/60Hz
• Maximum 20A combined load per Room
Controller; each relay rated for:
– Ballast or incandescent: 20A
– Motor load: 1Hp
• Class 2 output to DLM local network: 24VDC, 150mA across 3 RJ45 ports
• DLM local network parameters with LMRC-100 Series and/or LMPL-101 Room Controllers only:
– Maximum current: 600mA
– Category 5e cable, up to 1,000’
– Maximum of 4 room controllers, controlling up to 8 loads
– Up to 24 communicating devices
• Operating conditions: for indoor use only; 32-104°F (0-40°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five-year warranty

For other items like the WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS (LMRC-111, LMRC-112). LMRC-110 series room controllers include one or two relay(s) to switch a total of 10 amps, a high-efficiency switching power supply and dual 0-10 volt outputs per relay for control of dimmable loads including compatible LED drivers or electronic ballasts. They are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.

LMRC-110 series room controllers operate on one 120 or 277
volt, 10 amp feed and provide Class 2 power to sensors and
switches via the DLM local network. Once powered up, Plug n’
Go automatically configures system components for the most
energy-efficient operation. The room controllers then dim or
switch lighting or motor loads in response to input from the
communicating devices. When a dimming input is received, the
relay switches on when the dimmed level rises above zero, and
off when it reaches zero, to coordinate control of power and the
0-10 volt signal to the load. They also monitor the current draw
of the total connected load. Each room controller stores up to
16 scene preset levels for each dimmed output.

Features

• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network eliminatingwiring errors
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Optional lamp burn in; 12 or 100 hours
• Optional instantaneous current and voltage measurement of total connected load
• 2 RJ45 ports; molded cable tie ring for strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• This product meets the materials restrictions of RoHS
• U.S.-made models available for public works projects

Specifications

• Voltage: 120/277VAC; 50/60Hz
• Maximum 10A combined load per Room Controller; each relay rated for 10A ballast, E-ballast or incandescent
• Galvanically isolated Class 1 pigtails and Class 2 terminals for 0-10VDC signal; sinks up to 50mA per output (Class 1/
Class 2) per channel for control of compatible ballasts (25 if each sources 2mA)
• Intelligently controlled Class 2 output to DLM local network: 24VDC, up to 150mA across 2 RJ45 ports
• DLM local network parameters:
– Maximum current: 800mA
– Category 5e cable: 150’ per device to 1,000’ max.
– Up to 64 loads
– Up to 48 communicating devices
– Maximum 4 LMPB-100, LMPL-101 or LMRC-100 Series Room Controllers
• Requires LMCS 4.5.1, Segment Manager 2.1.23, or LMCT 5.24
(or later)
• Operating conditions: for indoor use only; @120/277V:
32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed (E101196)
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRH-101 DIMMING IR REMOTE CONTROL. The LMRH-101 Dimming IR Remote Control is a handheld personal control device for convenient on/off and raise/lower control of any load(s) connected to Digital Lighting Management (DLM) dimming room controllers. It uses an infrared transceiver to communicate with a DLM system via any DLM IR-enabled devices. The LMRH-101 operates on battery power. By default, it controls all loads on the DLM local network. The load assignment may be quickly reconfigured using Push n’ Learn.
To turn the load on, the user simply presses the top of the control button. Pressing the bottom of the button turns lights off. To raise or lower dimmable loads, the user presses and holds the top or bottom of the button until lighting reaches the desired level. The LMRH-101 will work with any DLM local network, operating all loads if in default mode, or the load(s) it has been configured to control.

Features

• Provides remote IR dimming control of lighting in a DLM system in conjunction with at least one dimming room controller
• Hidden configuration button for easy access to Push n’ Learn
• Communicates with DLM local network through any DLM
IR-enabled device
• Battery operated
• Includes wall mount holster and all necessary mounting hardware
• Can control one or more loads
• LED confirms button presses
• The product meets the materials restrictions of RoHS

Specifications

Operates on 3 AAA 1.5 volt batteries (included)
• DLM local network connection: IR transceiver
– Range of IR transmission: up to 32 ft. (10m)
– Angle of IR reception: 30°
• 1 control button with LED indicator
• Hidden configuration button to access Push n’ Learn
• Weight: approx. 3.2 oz. (91g), without mounting bracket
• Operating conditions: for indoor use only; 32-95°F (0-35°C); 5-95% RH, non-condensing
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRH-101 DIMMING IR REMOTE CONTROL click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRH-102 2-BUTTON IR REMOTE CONTROL. The LMRH-102 2-Button IR Remote Control is a handheld
on/off personal control device for convenient control of any
loads connected to Digital Lighting Management (DLM) room
controllers. It uses an infrared transceiver to communicate with
a DLM system via any DLM IR-enabled devices.

The LMRH-102 operates on battery power and transmits a digital signal for on or off whenever a pushbutton is pressed by a user. By default, the top button controls the first load in the system and the bottom button controls the second load. Button assigments may be quickly reconfigured using Push n’ Learn. The LMRH-102 will work with any DLM local network, operating loads one and two, if in default mode, or the loads it has been configured to control.

Features

Provides infrared (IR) control of two lighting loads or zones in a DLM system
• Hidden configuration button for easy access to Push n’ Learn™
• Communicates with DLM local network through any DLM IR-enabled device
• Battery operated
• Includes wall mount holster and all necessary mounting hardware
• Each button can control individual or multiple loads
• LEDs confirm button presses
• The product meets the materials restrictions of RoHS

Specifications

Operates on 3 AAA 1.5 volt batteries (included)
• DLM local network connection: IR transceiver
– Range of IR transmission: up to 32 ft. (10m)
– Angle of IR reception: 30°
• 2 control buttons, each with LED indicator
• Hidden configuration button to access
• Push n’ Learn
• Weight: approx. 3.2 oz. (91g), without mounting bracket
• Operating conditions: for indoor use only; 32-95°F (0-35°C); 5-95% RH, non-condensing
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRH-102 2-BUTTON IR REMOTE CONTROL click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRL-100 ISOLATED RELAY INTERFACE. The LMRL-100 Isolated Relay Interface is an optional component for a Digital Lighting Management (DLM) system. It enables seamless integration of third party devices such as HVAC systems or exhaust fans. The LMRL-100 device contains a single-pole, double throw isolated relay with normally open (N/O), normally closed (N/C) and common outputs. While the LMRL-100 resides on a DLM local network, it only receives signals from other devices on the network and does not transmit data via the DLM protocol. Furthermore, the device is not assignable to a specific load or room controller. The LMRL-100 activates in response to a
signal from any DLM occupancy sensor on the network.

Features

• Integrates Wattstopper Digital Lighting Management with any analog low voltage device
• Single LED for relay status
• Over-current protection
• Two RJ45 ports with hinged dust cover
• UL 2043 plenum rated
• The product meets the materials restriction of RoHS

Specifications

• Operating voltage: 24VDC from DLM network
• Isolated relay ratings:
– 24VDC/VAC, 1A, SPDT
– Normally open (N/O), normally closed (N/C) and common outputs
• Current consumption: 7mA
• DLM local network connection: 2 RJ45 ports
• Operating conditions: for indoor use only; 32-104°F (0-40°C)
• Fits inside 4” x 4” j-box, 1-gang back box or 3” octagonal box; optional DIN rail mounting
• UL and cUL listed
• FCC part 15 compliant

For other items like the WattStopper LMRL-100 ISOLATED RELAY INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH. LMSW-100 Series Wall Switches are low voltage devices for
energy-saving manual on/off control of one or more loads from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any load(s) connected to DLM room controllers. LMSW-100 Series Switches operate on Class 2 power supplied to a DLM local network by one or more room controllers. The switches send a digital signal for on or off whenever a pushbutton is pressed by a user. Plug n’ Go™ automatic configuration assigns each load to a switch button upon
system startup. If the number of buttons equals the number of loads, each button operates one load. If there are more loads than buttons, the last button controls multiple loads. Any extra buttons are unassigned. When multiple switches are installed, default operation is for multi-way control; each switch controls all of the loads on the system. Button assignments may be quickly reconfigured using Push n’ Learn™. Button configuration may be changed from load control to scene control using DLM configuration tools.

Features

• Hidden configuration button for easy access to Push n’ Learn
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1-, 2-, 3-, 4-, and 8-button models
• Each button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to dim the load
• Switches may be used for multi-way control
• Six color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• 1, 2, 3, 4 or 8 control buttons, each with LED status indicator
• Hidden configuration button to access
• Push n’ Learn
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH click here.

For more information on WattStopper’s line of lighting control solutions click here.