This is the low voltage PIR ceiling sensor. Wattstopper’s CI-300 Passive Infrared (PIR) Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensor mounts on the ceiling with a flat, low-profile appearance and provides 360 degrees of coverage.

CI-300 Series Sensors operate on 24 VDC, VAC or halfwave rectified. Utilizing the latest PIR technology, they automatically turn lighting on when a difference is detected between infrared energy from a human body in motion and the background space. When no occupancy is detected for the length of the time delay, lighting automatically turns off. For manual-on operation, the CI-300 will operate with a low-voltage momentary switch. Check out Wattstopper DLM products here.

360° up to 500 ft2

The WattStopper CS-350-N Passive Infrared (PIR) Dual Relay Vacancy Sensor provides automatic lighting shutoff for applications that require separate switching of two loads. It is engineered to comply with specific provisions of California’s Title 24-2013 energy code. The CS-350-N operates as a manual-on sensor. Users must press one or both of the on/off pushbuttons to turn on the connected loads. The CS-350-N employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. Also, the sensor keeps loads on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the connected loads off manually. The integral nightlight helps preserve night vision by providing low-level illumination when the connected loads are off. The nightlight uses energy-efficient LEDs.

Features

• Complies with 2011 NEC requirements
• Replaces standard switches for control of lighting and/or fans
• Contains two relays to control two independent lighting loads or circuits
• Adjustable time delay, 15 seconds to 30 minutes
• Amber LED nightlight turns on whenever connected loads are off
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to the device
• Operates most common types of lighting or fan motors
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• CA Title 24 compliant

For other items like the WattStopper CS-350-N PIR Dual Relay Sensor click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper DCC2-A 3-WIRE LV MOMENTARY DECORATOR SWITCH. The Decorator Low Voltage Momentary Switch (DCC2) has a
clean appearance and provides significant benefits over other three-wire momentary devices. It is intended for use with WattStopper lighting control panels and other applications requiring a momentary contact switch that provides on/ off signals. Available in four colors, it complements other decorator devices and matches the full line of Wireless Lighting Control Decorator products.

Three- and four-way switching is easily accomplished by parallel wiring a DCC2 to any number of other DCC2 switches. And by field wiring a jumper between the on and off terminals, the DCC2 can provide a two-wire momentary output to allow its use with Wattstopper occupancy sensors or the manual-on BZ-150 Universal Voltage Power Pack.

The DCC2 can operate a wide array of Wattstopper products, including lighting control panels, occupancy sensors and power packs. Additionally, its simple contact closure interface can provide a momentary on and off signal to many other devices, allowing it to initiate actions for other manufacturer’s devices (e.g., those that output DMX512 or RS485 signals that can control LEDs or other lighting systems).

Features

• Long-life LED locator/pilot light
• Three-way, four-way and multiway switching
• Unlimited number of switches may be connected
• Decorator styling
• Available in light almond, black, ivory and white

Specifications

• 12VAC/VDC, 24V Rectified, 24VAC/VDC
• 50mA Max. Internal Contact rating
• 500mΩ resistance when closed
• Single pole, double throw with center position rest
• Fits conventional decorator switch openings
• Dimensions: 2.64” x 1.75”x 1.98” (67.1mm x 44.5mm x 50.3 mm) L x W x D; depth in wall 1.65” (41.9mm)
• Five-year warranty

For other items like the WattStopper DCC2-A 3-WIRE LV MOMENTARY DECORATOR SWITCH click here.

For more information on WattStopper’s line of lighting control solutions click here.

Wattstopper DW-100 DUAL TECHNOLOGY WALL SWITCH. This is the dual technology wall switch sensor. The DW-100 dual technology wall switch sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies, and can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.

The DW-100 fits in a single gang junction box. Once the lights are ON, detection by either technology holds lights ON until occupancy is no longer detected and the time delay elapses. DIP switch settings allow for a variety of control options including Auto-ON operation, walk-through and test mode. By default, Auto-ON turns lighting on when both PIR and ultrasonic technologies detect occupancy. Additional DIP switch settings allow the user to choose which sensing technologies turn ON and hold ON the lighting.

Features

• Complies with 2011 NEC requirements
• Detection Signature Processing eliminates false triggers and
provides immunity to RFI and EMI
• Zero-crossing for long relay life
• Vandal resistant lens combines precise coverage with durability
• Choice of Manual-ON or Auto-ON operation
• Selectable walk-through mode turns lights off three minutes
after the room is initially occupied if no motion is detected
after the first 30 seconds
• Test mode allows quick and easy adjustments
• Selectable audible alert for impending shutoff
• In automatic mode, sensor returns automatically to Auto-ON
after lights are turned off manually; ideal for presentations
• Four occupancy logic options give users the ability to
customize control to meet application needs
• Optional light level sensing with simple setup
• Service mode allows sensor to operate as a service switch in
the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates
• BAA/TAA-compliant models available

For other items like the Wattstopper DW-100 DUAL TECHNOLOGY WALL SWITCH click here.

For more information on Wattstopper’s line of lighting solutions click here.

Wattstopper DW-200 DUAL TECHNOLOGY DUAL RELAY WALL SWITCH. This is the dual technology wall switch sensor w/ 2-relays. The DW-200 dual technology wall switch sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies to turn lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits and a variety of features.

The DW-200 fits in a single gang junction box. Each of the DW-200’s relays can control a separate lighting load. By default, when both PIR and ultrasonic technologies detect occupancy, relay 1 turns ON automatically. Detection by either technology holds lights ON. When occupancy is no longer detected and the time delay elapses, lights automatically turn OFF. Dual ON/OFF buttons allow the user to manually turn on and off each of the loads. DIP switch settings allow for a variety of control options such as Auto-ON or Manual-ON for each relay, walk-through, and test mode.

Features

• Complies with 2011 NEC requirements
• Detection Signature Processing eliminates false triggers and
provides immunity to RFI and EMI
• Zero-crossing on both relays for long relay life
• Vandal resistant lens combines precise coverage with
durability
• Choice of Manual-ON or Auto-ON operation, selectable for
each relay
• Selectable walk-through mode turns lights off three minutes
after the room is initially occupied if no motion is detected
after the first 30 seconds
• Test mode allows quick and easy adjustments
• Selectable audible alert for impending shutoff
• In automatic mode, sensor returns automatically to Auto-ON
after lights are turned off manually; ideal for presentations
• Four occupancy logic options give users the ability to
customize control to meet application needs
• Optional light level sensing with simple setup
• Service mode allows sensor to operate as a service switch in
the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates
• BAA/TAA-compliant models available

For other items like the Wattstopper DW-200 DUAL TECHNOLOGY DUAL RELAY WALL SWITCH click here.

For more information on Wattstopper’s line of lighting solutions click here.

WattStopper ELCU-200 EMERGENCY LIGHTING CONTROL UNIT. WattStopper’s ELCU-200 Emergency Lighting Control Unit is a self-contained device that allows any standard lighting control device to control emergency lighting in conjunction with normal
lighting in any area within a building. The ELCU-200 monitors a single circuit that provides normal lighting to an area. As long as
normal power is present, the ELCU-200 permits lighting control devices (e.g., occupancy sensors, panels, dimmers, or wall switches) to control the emergency lighting fixtures as well as the general lighting. If power is lost for any reason, including the tripping of a single branch circuit breaker, the ELCU-200 will force on the emergency fixtures for that area. The ELCU-200 can be wired either as a control device, so that emergency lighting follows
the control of normal lighting, or as a bypass device to shunt emergency power around a control device (e.g., a dimmer) when normal power fails.

Features

• Eliminates energy waste caused by emergency lighting that is always on
• Integral push-to-test button activates emergency mode for a true test condition
• Connects to EMTS-100 Remote Test Switch or other input to activate emergency on from a remote location
• Operates as a control device or as a shunt
• Senses local single circuit power failure
• Zero cross switching technology for reliability and increased product life

• Compatible with WattStopper occupancy sensors, daylighting controls, lighting control panels, and dimmers
• LED indication for emergency and normal power
• Half-second delayed on positively identifies emergency fixtures for required maintenance
• Provides absolute fail-to-on emergency lighting
• UL924 listed, meets NEC, OSHA and NFPA safety codes; UL2043 plenum rated
• Qualifies for use on ARRA-funded projects

Specifications

• 120/277 VAC; 60Hz
• Maximum load:
– Ballast 20 A @ 120/277 VAC
– Incandescent 10 A @ 120 VAC
– Motor 1HP @ 120 VAC
• Remote activation: supplies 24 VDC source for dry contact closure
• Integral control: push-to-test button on unit
• Housing: fire rated V-0, 176° F (80°C)
• Operating temperature range: 32 to 131°F (0 to 55°C)
• Relative humidity range: 5 to 95%, noncondensing
• Dimensions: 1.7” x 2.97” x 1.64” (43.2mm x 75.4mm x 41.7mm) H x W x D with a 1/2“ (12.7mm) threaded nipple
• UL, cUL listed Emergency Lighting and Power Equipment; five year warranty

For other items like the WattStopper ELCU-200 EMERGENCY LIGHTING CONTROL UNIT click here.

For more information on WattStopper’s line of lighting control solutions click here.

This is the wireless RF PIR occupancy sensor. The EOPC-100 Wireless RF PIR Occupancy Sensor works with EOSW-100 Series RF Wall Switches to turn lights on and off based on occupancy. The sensor mounts on the ceiling and provides 360° passive infrared coverage. EOPC-100 wireless sensors operate on power supplied by two photovoltaic panels capable of reaching a full charge in 6 hours when the ambient light level is 20 footcandles (215 lux). Each sensor can be paired with multiple loads controlled by RF wall switches. Paired loads configured for automatic-on operation turn on when a sensor transmits an RF signal that it has detected occupancy. As long as the sensor detects occupany it continues transmitting signals to the paired wall switch receivers. All paired loads turn off when no occupancy has been detected for the duration of the selected time delay. Check out Wattstopper DLM products here.

• Wireless RF occupancy sensors work with EOSW-100 Series RF wall switches
• Detection Signature Processing to eliminate false triggers and provide immunity to RFI and EMI
• Trimpot for sensitivity adjustment
• Test mode allows quick and easy set up
• Includes plate for mounting to single- or double-gang junction boxes or ceiling tile
• Reversible magnetic/adhesive disc for surface mounting
• Sensor coverage tested to NEMA Guide Publication WD 7-2000

This is the wireless handheld configuration tool. Installers and end users can use the FSIR-100 for initial setup and subsequent sensor adjustment to ensure conformity with design intent. It simplifies changes to sensor settings by making the adjustment process ladder-free. It is compatible with IR-enabled Wattstopper HBP and FSP sensors. These products are ideal for use in parking facilities, gas station, pedestrian pathways and warehouse. Check out Wattstopper DLM products here.

• Establishes high and low mode light levels for 0-10V control
• Sets time delay, cut off time and sensitivity for motion detection
• Enables light level settings for either hold off control or daylighting control
• Initiates automatic setpoint configuration
• Allows ramp up and fade down rate adjustments
• Locks sensor settings to prevent unauthorized changes
• This product meets the materials restrictions of RoHS

WattStopper HBEM3 – HIGH BAY EXTENDER MODULE.

This is the high bay extender module. The HBEM3 high bay extender module includes two chase nipples. The short end of the chase nipples snap into the HBEM3 or other plastic connection box. The long end of the longer chase nipple fits into a metal fixture with a standard knockout. If the fixture wall does not exceed 1mm (0.04”) in thickness, the nipple snaps into the knockout securely and the internal nut (included) is not necessary. The included nut should always be used if the fixture wall is thicker than 0.04” (1mm).

Specifications

Extender module snaps together to protect sensor and fixture wires.
Indoor use only
Operating temperature: 32°F to 158°F (0°C to 70°C)

Materials

White ABS, Flame retardant
Impact resistant
Recyclable
Meets materials restrictions of RoHS

Product Overview

The HBEM3 Extender Module allows the customer to attach an HBEM3 series occupancy sensor to the side of a light fixture.

With the extender module attached, the HBEM3 sensor can be adjusted up or down to ensure the sensor is not blocked by the fixture.

For other items like the WattStopper HBEM3 – HIGH BAY EXTENDER MODULE click here.

For more information on Wattstopper’s line of lighting solutions click here.

This is the Isolé power strip w/ personal sensor. The Isolé IDP-3050 is an energy-saving control system that provides maximum surge and noise suppression while keeping plug load equipment off when there is no occupancy. It consists of an eight-outlet power strip and a personal occupancy sensor.

The IDP-3050 turns plug load devices on and off based on occupancy. The personal sensor connects to the eight-outlet power strip with the attached cable. The power strip contains six outlets controlled by occupancy and two outlets that are uncontrolled. The IDP-3050 automatically turns all controlled devices on when the workspace is occupied, and off when the workspace has been unoccupied for the user-defined time delay. Uncontrolled devices remain on regardless of occupancy. Check out Wattstopper DLM products here.

• Eight outlets; six controlled, two uncontrolled
• Surge and noise suppression protects desktop equipment
• Ground protected for safety; will not operate without a grounded outlet
• Two LEDs to indicate: 1) correct wiring and grounding; 2) surge protection is functioning
• Installation requires no hardwiring
• Flat offset plug for wire management
• One uncontrolled outlet and one controlled outlet are wall transformer-enabled
• Plugs into a standard three-prong outlet
• Uses latest passive infrared (PIR) technology to detect occupancy
• User-adjustable time delay of 30 seconds to 30 minutes
• Multi-level Fresnel lens for superior occupancy detection
• 120° coverage, up to 300 square feet
• ASIC technology reduces components and enhances reliability
• Instantaneous response time

This is the InteliTimer Pro logger. The InteliTimer Pro (IT-200) is a revolutionary occupancy and light logger that establishes the energy saving potential when using occupancy sensors. With this versatile tool, spaces for lighting control use can be pinpointed and savings can be verified.

The IT-200 records a log entry every time there is a change in either the occupancy status or lighting status and stores a detailed history of these events for retrieval by PC. It utilizes passive infrared technology to detect occupancy. It observes the light level through a clear, plastic light pipe to determine if lights are on or off. The logger distinguishes artificial lighting from natural lighting to give accurate “lights-on” readings. To log data, a user places the logger so that its lens has a clear view of the workspace and the light-pipe aims towards the nearest light fixture. Check out Wattstopper DLM products here.

• Reports show graphs of occupancy and lighting and projects savings and statistical information
• Users set logging parameters for more accurate savings projection
• Powered by a lithium battery, with an extended life span of approximately ten years
• Small and lightweight for ease of use and portability
• Installs quickly and conveniently and requires no wiring
• IT-ProSoft 2.0 operates in six languages (English, French, German, Spanish, Swedish, and Norwegian) with appropriate currency/ date/time formats, and energy and HVAC defaults
• Occupancy detection LED helps users confirm that logger is detecting motion in desired space
• Light level LED helps users set logger to identify the on and off lighting levels of different locations
• The LEDs work for a 60 second test period to preserve battery life

WattStopper LCSP-2 LC8 DUAL SINGLE POLE RELAY MODULE. The LC8 panel provides zone-based control of up to eight channels, or zones, of interior and exterior lighting. Zones respond to control signals from the system clock, or an accessory photocell, to automatically turn lighting on and off. The LC8 panel uses interchangeable relay modules, available separately, that can be selected to suit project needs. Relay
options include the LCSP-2 dual single-pole module and LCDP1 double-pole module.

Features

• Nonvolatile program memory retains all programming during power outages
• Interchangeable single-pole and double-pole relay modules
• Manual override of relays and channels via touchscreen interface
• Eight universal switch inputs for low voltage switches, occupancy sensors or other devices to directly control each relay
• Pilot light output for each switch input
• Accepts most types of switch inputs
• Compatible with LVSW-100 Series Low Voltage Switches and AS-100 Automatic Wall Switch

Specifications

• Power input: 120/277 VAC; 50/60 Hz
• Accessory power: 500 mA at 24 VDC
• Switch inputs with screw terminals; compatible with 3-wire momentary, 2-wire momentary or maintained with pilot light output
• Relay grouping: configurable to switches through touchscreen user interface
• Panel weight: 8.1 lbs. (without relays)
• Relays: modular; dual 1-pole or single 2-pole
• Relay weight (module):
– LCDP-1: 0.49 lbs.
– LCSP-2: 0.37 lbs.
• LCSP-2 module relay ratings:
– 20 amp tungsten @ 120 VAC
– 20 amp ballast @ 120 or 277 VAC
– 0.5 hp @ 120 VAC
• LCDP-1 module relay ratings:
– 20 amp ballast @ 208, 240 or 480 VAC
– 1 hp @ 208, 240 or 480 VAC
• SCCR (short circuit current rating): 14,000 amps
• Operating conditions: for indoor use only; 32–139°F (0–60°C); 5–95% RH noncondensing
• UL and CUL listed
• One year warranty

For other items like the WattStopper LCSP-2 LC8 DUAL SINGLE POLE RELAY MODULE click here.

For more information on WattStopper’s line of lighting control solutions click here.