**Stand Alone Mounting Adhesive-Mount (included with Pico® wireless control)

**Screw-Mount (sold separately): Model: PICO-SM-KIT

• Note: Kit includes special screws to be used for more permanent mounting and / or for non-smooth surfaces.

This is a Pico Wireless Control 2 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 2 button w/ raise/lower. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 3 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 3 button w/ raise/lower. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This the 2 button Pico wireless control w/ nightlight. Check out the RadioRA 2 products page here.

• Provides control for the following:
  • Maestro WirelessR controls
  • PowPakR Modules
  • Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM)
  • GRAFIK EyeR QS wireless systems
  • RadioRAR 2 systems
  • HomeWorksR QS wireless systems
  • CasetaT Wireless dimmers
• Battery-powered. Requires no wiring.

Portor PT-AL1 LED Area Light.  The PT-AL1 is ideal for outdoor wet locations at multifamily, commercial and industrial applications.  This fixture is suitable for parking lots, car dealerships, walkways, school campuses, shopping centers and industrial areas and other outdoor places where spot lighting is needed. Portor’s AL1 Area Light Series features energy efficient and provide advanced optical control. The ultra slim profile deliver enhanced performance for general area lighting applications. The robust die-cast housing provides excellent thermal management for longer life and can withstand everyday harsh outdoor environments. The tool-less access to driver makes it easy for maintenance and value add accessories.

Features

Construction- Die-Cast aluminum body combine with state of the art heat dissipation and tool-less access to driver housing makes the AL1 a one of a kind area light. Waterproof, built rugged for outdoor harsh condition.

Electrical- Luminaire is built with the highest quality driver that is Universal Voltage (100V-27V), uses long lasting, high-efficient LED packages. Water resistant LED chips (custom order available for 347V-480VAC driver).

Optical System- Comes standard with Type III optics designed to reduce glare and improve light distribution through precision formed lens optics. Type V is optional.

Mounting- Multiple mounting options available: Slipfitter, square-pole mount, round-pole mount, wall mount and trunnion mount. Pole options also available.

Sensor Ready- Motion sensor and Photocell sensor available, can do in-house installation.

Dimming- 0-10V dimmable (1-10V dimming on AL1-300W model)

Energy Savings- Over 70% energy savings than traditionally fluorescent fixtures, low heat productions requires less maintenance and operation cost.

Certification- ETL Listed, FCC, RoHS, CE, DLC Premium Listed, IP65 rated with LM79 and LM80 report

Specifications

Wattage: 100W | 150W | 200W | 240W| 300W

Delivered Lumens: 15,526Lm – 45,313

Efficacy: 148 Lm/W – 160 Lm/W

Voltage: 100V-277V

CCT: 3000K, 4000K, 5000K

CRI: 80+

IP Rated: IP65 Wet Location

Dimmable: 0-10V Dimming

Power Frequency: 50/60 Hz

Power Factor: >0.93

THD: <10%

Working Temperature: -40ºF – 122ºF

Average Hrs: 50,000

Warranty Time: 5 Years

For other items like the Portor PT-AL1 LED Area Light click here.

For more information on Portor’s line of lighting solutions click here.

Portor PT-DLFG-R-4I-9W-3CCT 4″ LED Gimbal Downlight. The PT-DLFG fixture is efficient, compact and durable. Portor’s PT-DLFG color tuning technology, and 90º tilting/360º rotating capability, Portor’s 4” gimbal downlights make accent, spot lighting, and wall washing easy.  This fixture is ideal for both commercial and residential lighting, and are optimal for sloped ceilings, wall washing and general purpose lighting. The fixture provides excellent light distribution and uniformity.

Features

CONSTRUCTION- Aluminum die-cast body and trim with architectural white finish. Designed for new construction, remodel or retrofit. Standard gasket included to ensure proper seal.

ELECTRICAL- Luminaire is built with the highest quality 120V drivers, ensuring energy efficiency.

Energy Savings- 80% more energy savings than halogen lamps. Low heat production requires less air-conditioning requirements, further increasing energy cost savings.

Dimming- Triac dimmable down to 5%. Compatible with most major brands of dimmers.

Certifications- Energy Star Listed , ETL Listed, RoHS

Specifications

Wattage: 9W

Delivered Lumens: 600Lm

Efficacy: 67 L/ W

Voltage: 120V

CCT: 3000K, 4000K, 5000K

CRI: 90

IP Rated: Suitable for wet locations

Dimmable: triac dimming

Power Frequency: 50/60 Hz

Power Factor: >0.9

Average Hrs: 50,000

Warranty Time: 5 Years

Certifications: Energy Star Listed , ETL Listed, RoHS

For other items like the Portor PT-DLFG-R-4I-9W-3CCT 4″ LED Gimbal Downlight click here.

For more information on Portor’s line of lighting solutions click here.

Portor PT-DLR-4I-8W-3CCT 4” Retrofit Recessed Downlight. The PT-DLR fixture is is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, pantries, offices, hallways, and much more! Multiple lighting color temperatures (3000K, 4000K, 5000K) give users options for different applications while maintaining the same aesthetic.  The PT-DLR is available in 4″ and 6″ diameters.

Features

Constuction- PC driver housing and aluminum reflector with architectural white finish. Standard industry torsion springs adjust to fit 4” and 6” compatible housings. Standard gasket included to ensure proper seal E26/GU24 base.

Electrical- Luminaire is built with the highest quality 120V drivers, ensuring energy efficiency.

Energy Savings- 80% more energy savings than halogen lamps. Low heat production requires less
air-conditioning requirements, further increasing energy cost savings.

Dimming- Triac dimmable down to 5%. Compatible with most major brands of dimmers.

Certifications- ETL Listed, FCC, RoHS, CE & Energy Star Listed

Specifications

Wattage: 12W

Lumens: 1040Lm

Efficacy: 87 Lm/ W

Voltage: AC120V

Power Frequency: 50/60 Hz

CCT: 3000K, 4000K, 5000K

CRI: >90

IP Rating: IP40, Suitable for damp locations

Dimmable: Triac Dimming

Power Factor: >0.9

Warranty: 5 Year Limited

For other items like the Portor PT-DLR-4I-8W-3CCT 4” Retrofit Recessed Downlight click here.

For more information on Portor’s line of lighting solutions click here.

Portor PT-FLT LED Flood Light.  The PT-FLT is ideal for outdoor wet locations at multifamily, commercial, industrial, and residential applications.  This fixture is suitable for facades, outdoor signage, buildings, shopping centers, industrial areas and other outdoor places where spot lighting is needed.  The PT-FLT has a broad beam to light up dark areas around the home or business.  The bright white beam is comparable to the brightness of daylight. Portor offers the PT-FLT with higher lumen counts that are capable of cutting through inclement weather like heavy rain and fog, making them a perfect option for businesses and commercial buildings in harsher climates where snowfall is greater, or locations where outdoor work is required no matter what the conditions.

Features

Construction- Die-cast aluminum housing sealed by a silicone ring that makes the fixture waterproof.

Electrical- Luminaire is built with high quality 100-277VAC universal drivers.

Optical System- Robust glass lens designed to reduce glare and improve light distribution through precision formed lens optics.

Certification- ETL Listed for Wet Location, FCC, RoHS, CE, IP65 Rated

Specifications

Wattage: 50W | 100W | 150W

Delivered Lumens: 6274Lm – 20970Lm

Efficacy: 130 L/W

Voltage: AC100-277V

CCT: 5000K

CRI: >80

IP Rated: IP65

Dimmable: Yes

Finish/ Material: Aluminum/ Tempered Glass Lens

Beam Angle: 60°/110°

Average Hrs: 50,000

Warranty Time: 5 Years

For other items like the Portor PT-FLT LED Flood Light click here.

For more information on Portor’s line of lighting solutions click here.

Power packs are the heart of the low voltage sensor system. A PP20 Series power pack transforms
Class I high voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC for powering remote sensors. The
PP20 and the SP20 Series slave pack are also capable of switching lighting loads on and off using
their internal relays. Class 2 wire leads connect to 18 to 22 AWG low voltage cable running to the
sensors, making installation easy and clean. Power packs also have an elongated chase nipple that
allows it to be mounted either directly through a ½ inch knockout into a junction box, or inside an
adjacent box for meeting specific local code requirements in ceiling plenums.
The most versatile power pack is the PP20, which utilizes a patented relay contact protection and
can power up to 14 sensors. Dual-circuit control can be handled by two PP20’s, one PP20 2P Series
2-Pole power pack, or a PP20 power pack and a SP20 slave packs.
FEATURES

•  Powers Low Voltage Sensors (PP20/PP20 2P only)
•  Self-Contained Relay(s) Switch Line Voltage Loads
• Relay Contact Protection
• Plenum Rated

PP and UPP 1 Series Power Packs provide both the 24 V- power supply to operate Lutron® wired occupancy sensors, as well as the 16 A line-voltage relay to control the load, in one compact housing. The unit can be mounted inside a ballast enclosure or inside / outside a junction box. The manual-ON Power Pack (-DV-M) is used to provide a vacancy-only solution (not configurable for occupancy behavior) when paired with Lutron® wired occupancy sensors. A low-voltage momentary switch should be used to manually turn ON the load while the sensor automatically shuts the load OFF when unoccupied. Pressing the momentary switch can also turn the load OFF. The auxiliary Power Pack (-SH) must be used in conjunction with at least one line-voltage Power Pack and one Lutron wired occupancy sensor to switch additional loads.

Features

• High-impact UL94 flammability-rated plastic case construction
• Relay: Class B 266 °F (130 °C) insulating material; silver alloy contacts
• Power Pack units (PP-DV / UPP-DV, PP-347H, PP-DV-M / UPP-DV-M) power up to 3 total devices. PP-SH / UPP-SH counts as 1 device; each occupancy sensor counts as 1 device.
• For indoor use only, 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing