This is the 2-Wire Global Photosensor. The Indoor Digital Photosensor has an extended sensitivity range which allows it to be used in almost any location without needing adjustment for the reflectivity of the environment. With a dual housing construction, Indoor Digital Photosensors may be used as a full-sized sensor or separated to reduce its footprint.

• Two-wire photo sensor designed for single-zone outdoor lighting control applications
• Monitored using Digital Time Clock(DTC)
• Sealed housing for operation in wet conditions

This is the LC&D 3 wire interior photocell. Check out our Acuity products here.

• LC&D – 3 Wire Interior Photocell for Daylighting
• Can be used in almost any location without the need to adjust to the reflectivity of the environment
• Standard Ceiling Mount Configuration
• Extended sensitivity range; no adjustment needed
• Ability to be used in both open loop and closed loop applications
• Low Voltage
• Wire into LC&D Blue Box LTD Panel on board Input
• “-TZ” is for the LC&D LTD Panel

• The Caséta Wireless In-Wall Dimmer PRO provides dimming of multiple load types and, when paired with Pico remote controls, allows remote control from anywhere in the space.
• When used with the Lutron Smart Bridge or Smart Bridge PRO, the Caséta Wireless In-Wall Dimmer PRO may be programmed via the Lutron app
• Lutron ® patented Clear Connect ® RF Technology works through walls and floors.
• Neutral-optional dimmer is ideal for retrofit applications when used in two-wire mode

LAMP DIMMER

• Features two receptacles for simultaneous control of two lamps
• Simply plugs into a standard wall receptacle
• Works with dimmable LEDs (up to 100W)
• Also works with halogen and incandescent bulbs (up to 300W)

• Provides switching of multiple load types, occupancy/vacancy sensing, and daylight harvesting.
• RF Technology works through walls and floors.
• Two-wire switch perfect for retrofit applications.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

• Works with Pico remote controls
• Works with the Lutron App
• Lutron patented Clear Connect RF Technology works through walls and floors
• Dual voltage (120 V~ and 277 V~)
• Simple two-wire installation (no neutral wire required)

• Works with Pico remote controls
• Works with the Lutron App
• Lutron patented Clear Connect RF Technology works through walls and floors
• Installation requires neutral wire
• Low minimum load requirement

DIMMER

• Doesn’t require a neutral wire—ideal for retrofit or new construction
• No polarity for line or load wiring—mistake-proof wiring
• Works with compatible dimmable LEDs (up to 150W), and incandescent and halogen bulbs (up to 600W)
• Use Pico remotes for additional dimmers in multi-location dimming applications

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

Mounting Considerations:

• Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception.
• All RF devices must be mounted on non-conductive materials to ensure proper performance.
• If you wish to mount your PicoR wireless control to a metal surface, the PICO-MOUNT-1-XX-CPN5733 will be required in order to maintain proper RF performance.