This is the passive infrared ceiling sensor. Wattstopper’s CI-200 Series Passive Infrared (PIR) Ceiling Sensors provide 360° coverage to detect occupancy in the controlled area. These low-profile sensors reliably control lighting in a variety of applications.

The CI-200 Series Sensors are 24 VDC and control lighting through Wattstopper power packs. Utilizing the latest PIR technology, they turn lighting on when a difference is detected between the infrared energy from a human being in motion and the background space within the controlled area. After the area is vacated for a user-adjustable time delay, lighting automatically turns off. Check out Wattstopper DLM products here.

This is the passive infrared line voltage ceiling sensor. Wattstopper’s CI-355 passive infrared (PIR) occupancy sensor automatically turns lighting on and off based on occupancy. The sensor mounts on the ceiling with a flat, low-profile appearance and provides 360 degrees of coverage.

The CI-355 is line voltage and operates on a single phase at 120, 230, 277 or 347 VAC. The sensor uses passive infrared technology (PIR) to sense occupancy and automatically turn lighting on. PIR works by sensing the difference between infrared energy from a human body in motion and the background space. When no occupancy is detected for the length of the time delay, lighting automatically turns off. Check out Wattstopper DLM products here.

CI-355 – 360° up to 1200 ft2

CI-355-1 – 360° up to 500 ft2

LC&D GR1408LTD Blue Box Relay Panel

• Master Panel in Surface Mount Enclosure
• No modem
• Order Pre-Programmed for Easy No Hassle Installation (fees apply)
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 8 Relays (relays included)
• 0-10 Volt Dimming Control
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is a complete basic system and does not include modem or other accessories. For custom options check out our customizer here.

For more information visit the Acuity website here.

The CM family of ceiling mount occupancy sensors provide a range sensor solutions for applications
with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors utilize 100%
digital Passive Infrared (PIR) detection and are available with several lens options, providing
flexibility for multiple mounting height and coverage pattern requirements. Dual technology (PDT)
occupancy detection can also be added as an option for applications where occupants are stationary for
long periods of time.
FEATURES
• 360° coverage pattern
• Push- button programmable, adjustable time delays, and multiple operating modes
• 100 hr. lamp burn-in timer
• No field calibration or sensitivity adjustments required
• Convenient test mode
• Green LED indicator

The CM family of ceiling mount occupancy sensors provide a range sensor solutions for applications
with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors utilize 100%
digital Passive Infrared (PIR) detection and are available with several lens options, providing
flexibility for multiple mounting height and coverage pattern requirements. Dual technology (PDT)
occupancy detection can also be added as an option for applications where occupants are stationary for
long periods of time.
FEATURES
• 360° coverage pattern
• Push- button programmable, adjustable time delays, and multiple operating modes
• 100 hr. lamp burn-in timer
• No field calibration or sensitivity adjustments required
• Convenient test mode
• Green LED indicator

The CM family of ceiling mount occupancy sensors provide a range sensor solutions for applications
with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors utilize 100%
digital Passive Infrared (PIR) detection and are available with several lens options, providing
flexibility for multiple mounting height and coverage pattern requirements. Dual technology (PDT)
occupancy detection can also be added as an option for applications where occupants are stationary for
long periods of time.
FEATURES
• 360° coverage pattern
• Push- button programmable, adjustable time delays, and multiple operating modes
• 100 hr. lamp burn-in timer
• No field calibration or sensitivity adjustments required
• Convenient test mode
• Green LED indicator

The CMR 9 Series Standard Range 360° occupancy sensor incorporates Passive Infrared (PIR) detection
technology into an attractive line powered occupancy sensor that provides amazing sensitivity to
small motions (e.g. hand movements) and excellent payback. The CMR 9 is an economical solution for
providing automatic lighting control where a wall switch replacement sensor is not applicable. With
an integrated line switching relay, the CMR 9 is perfect for applications where locating a power
pack is difficult, such as retrofitting rooms with concrete or inaccessible ceilings.

FEATURES:

• Push-button programmable
• Adjustable time delays
• Multiple operating modes
• No field calibration or sensitivity adjustments required
• No minimum load requirements

The CMR 9 Series Standard Range 360° occupancy sensor incorporates Passive Infrared (PIR) detection
technology into an attractive line powered occupancy sensor that provides amazing sensitivity to
small motions (e.g. hand movements) and excellent payback. The CMR 9 is an economical solution for
providing automatic lighting control where a wall switch replacement sensor is not applicable. With
an integrated line switching relay, the CMR 9 is perfect for applications where locating a power
pack is difficult, such as retrofitting rooms with concrete or inaccessible ceilings. For rooms
with obstructions, the CMR PDT 9 Series sensor is recommended.

FEATURES:

• Push-button programmable
• Adjustable time delays
• Multiple operating modes
• No field calibration or sensitivity adjustments required
• No minimum load requirements

The CMR 10 Series incorporates Passive Infrared (PIR) technology into an attractive and economical
line powered sensor to provide maximum viewing from the ceiling. When mounted at 9 ft (2.74 m),
this sensor views up to 28 ft (8.53 m) in all directions. Its circular coverage pattern is designed
for walking motions; making it ideal for T-shaped intersections in corridors, or other areas where
wall mounting a sensor is not practical. Low ceiling heights are also best covered with the CMR 10.
For example, when mounted at only 7 ft (2.13 m), the height of pick aisles in many distribution
centers, the CMR 10 provides a 32 ft (9.75 m) diameter pattern of coverage. For detection of minor
motion is also required, the CMR PDT 10 Series Dual Technology sensor is recommended.

FEATURES
• Push- button programmable, adjustable time delays, and multiple operating modes
• 100 hr lamp burn-in timer
• No field calibration or sensitivity adjustments required

The CMR 9 Series Standard Range 360° occupancy sensor incorporates Passive Infrared (PIR) detection
technology into an attractive line powered occupancy sensor that provides amazing sensitivity to
small motions (e.g. hand movements) and excellent payback. The CMR 9 is an economical solution for
providing automatic lighting control where a wall switch replacement sensor is not applicable. With
an integrated line switching relay, the CMR 9 is perfect for applications where locating a power
pack is difficult, such as retrofitting rooms with concrete or inaccessible ceilings.
For rooms with obstructions, the CMR PDT 9 Series sensor is recommended.

FEATURES:

• Push-button programmable
• Adjustable time delays
• Multiple operating modes
• No field calibration or sensitivity adjustments required
• No minimum load requirements

Connect-BDG2-1 Lutron Radio RA2 Connect Bridge is needed to connect to the Lutron App or any of the compatible home system it supports. Initial setup for the RadioRA2 devices may require some programming. Contact us for support and questions: P: 562-485-6624 E: info@literitecontrols

The Lutron Radio RA2 Connect Bridge creates a link between a RadioRA 2 or HomeWorks QS system and the Lutron cloud, enabling remote access to your system. Connect-BDG2-1 replaces the Connect-BDG-1.

Features

• Works with the Lutron Connect app (Android® and iOS®)
• Provides remote access for control and monitoring of system via Lutron Connect app 1,2
• Timeclock syncing to always ensure accurate system time
• Compatible with Apple HomeKit technology for up to 99 zones – Uses Siri voice control to adjust lights and shades
• Sonos® endorsed integration
• Integrates with Amazon® Alexa®-enabled devices
• Supports geofencing from the Lutron Connect App

Models Available

• CONNECT-BDG2-1: 5 V- 300 mA (North America with Power Supply T-5DC-USB-WH)
• CONNECT-BDG2-2: 5 V- 300 mA (Without Power Supply)
• CONNECT-BDG2-3: 5 V- 300 mA (With Power Supply Kit T-5V-PS-KIT-BL – includes 4 plug adapters for United Kingdom, Europe, Australia, and China)

Radio RA2 Connect-BDG2-1 pairs with these items.

Radio RA2 Applications

The Lutron Radio RA2 Connect Bridge is required when using the Lutron Connect app. The Lutron Connect App is compatible with iOS devices version 9.0 or later and Android devices 4.1 (Jellybean) or later.

To control this HomeKit-enabled accessory, iOS 9.0 or later is recommended. Communication between iPhone, iPad, or iPod Touch and HomeKit-enabled Connect Bridge is secured by HomeKit technology. Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set up as a home hub.

A working internet connection, Lutron Connect Bridge, Lutron Connect App 2.0 or newer and Sonos app are required.

A working internet connection, Lutron Connect Bridge, and Lutron Connect App 3.0 or newer are required.

This is the PIR wall switch vacancy sensor. The CS-50 Passive Infrared (PIR) Vacancy Sensor provides automatic shutoff for single-pole lighting control applications. It is engineered to comply with specific provisions of California’s Title 24-2013 energy code. The CS-50 operates as a manual-on sensor. Users must press the pushbutton to turn on lighting. The CS-50 employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the lighting off manually. The CS-50 is shipped preset for a 30 minute time delay, and does not require any adjustment after installation. If desired, the time delay may be easily reduced to 25, 20, 15, 10 or 5 minutes or to 30 seconds. The time delay should be set relative to the anticipated duration of stay and level of activity in the room; 30 minutes for guest room and executive restroom, and 5 to 10 minutes for pantries and laundry rooms. Check out Wattstopper DLM products here.

• Replaces single-pole switches
• Adjustable time delay, 30 seconds to 30 minutes
• If enabled, status indicator blinks when motion is detected
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to device
• Operates most common types of lighting or fan motors
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• CA Title 24 compliant