This is a Vive PowPak Wireless Fixture Control For Ecosystem. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak Wireless Fixture Control For Ecosystem Enables compliance with lighting control requirements in ASHRAE 90.1 and IECC.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Title 20/24 certified lighting control device
• Enables compliance with lighting control requirements in ASHRAE 90.1 and IECC

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Uses wireless infrared communications to select and adjust scenes.
• Scene selection buttons select four scenes.
• Off button turns all lights off.
• Master raise/lower button brightens or dims all lighting zones.
• Works with GRAFIK Eye 3000 and 4000 Series Control Units or any Wallstation with an infrared receiver.

• 100-277 V~ forward, reverse, and center phase control input capability
• Provides 0—10 V- control and switching capabilities to switch and dim current sourcing fluorescent ballasts and LED drivers.
• Switches and dims current sourcing 0—10 VDC electronic dimming ballasts/drivers powered by
  100—277 VAC. Switches up to 16 A of electronic capacitive ballasts/drivers.

This is the Replacement Flush-mount Installation Adapter for Lutron Vive system. It requires a 6 in (153 mm) hole to be cut in the ceiling for mounting. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.

Sensors can be assigned to multiple switches.

This is the Replacement Surface-mount Installation Adapter for Lutron Vive system. It has Knockouts for 3/4 in (19 mm) conduit. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.

Sensors can be assigned to multiple switches.

This is the Vive Wireless Hub. The Vive hub provides a connection point for Lutron Vive devices such as PowPak wireless dimming and switching modules, PowPak Wireless Fixture Controllers, PowPak 20 A Relay Modules, Maestro Wireless dimmers and switches, Pico remote controls, Radio Powr Savr occupancy sensors, and daylight sensors. For a complete list of compatible devices, see spec sheet (downloadable PDF). Click here to see the Lutron Vive story.

Features:

• Communicates with controls on a floor using Lutron wireless Clear Connect technology (range radius of 71 ft [22 m]).
• Distributed system architecture. Wireless sensors and controls must be located within 60 ft. (18 m) line of sight, or 30 ft. (9 m), through walls, of the associated device.
• Supports timeclock events based on both sunrise and sunset or fixed time-of-day.
• Integrated multi-color LED provides feedback on what mode the hub is in.
• Contact Closure Inputs for integration with devices by others including devices for Title 24 Automatic Demand Response

• Supports up to 50 wireless devices (Caséta Wireless dimmers, plug-in dimmers, and switches, PicoR remote controls, wireless shades). Smart Bridge/Smart Bridge PRO counts as one device.
• Programmed via the Lutron App (available for iOS and Android).
• Scene control via the Lutron App.
• Timeclock scheduling of daily events via the Lutron App.
• Connects to Wi-Fi router via Ethernet.
• Local device operation will continue to function if internet connection is lost or Smart Bridge/Smart Bridge PRO is powered down or not communicating.
• System access from anywhere in the world using the Lutron App.
• Supports Caséta Wireless devices, Serena shades, and Pico remote controls.
• Control outside the app via widgets (iOS and Android).
• Supports Geofencing from the Lutron App.
• Control from Apple Watch.
• Supports Siri and Apple HomeKit technology.

• Supports up to 50 wireless devices (Caséta Wireless dimmers, plug-in dimmers, and switches, PicoR remote controls, wireless shades). Smart Bridge/Smart Bridge PRO counts as one device.
• Programmed via the Lutron App (available for iOS and Android).
• Scene control via the Lutron App.
• Timeclock scheduling of daily events via the Lutron App.
• Connects to Wi-Fi router via Ethernet.
• Local device operation will continue to function if internet connection is lost or Smart Bridge/Smart Bridge PRO is powered down or not communicating.
• System access from anywhere in the world using the Lutron App.
• Supports Caséta Wireless devices, Serena shades, and Pico remote controls.
• Control outside the app via widgets (iOS and Android).
• Supports Geofencing from the Lutron App.
• Control from Apple Watch.
• Supports Siri and Apple HomeKit technology.
• Supports Sivoia QS Triathlon and select Sivoia QS Wireless shades (venetian and horizontal sheer blinds are not supported).
• Integration with select A/V and security systems (see www.casetawireless.com/integration for details).

Solid Ceiling (Drywall, Plaster, Concrete, or Wood)

• Temporary mounting: Ten (10) temporary mounting strips can be purchased in the kit, L-CMDPIRKIT, for temporarily mounting and testing the sensor.
• Permanent mounting: Screws and anchors (for drywall or plaster) provided to mount the sensor.