This is a Vive PowPak Relay Module with Softswitch. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak Relay Module with Softswitch receives up to 10 Pico remote, 10 Radio Powr Savr occupancy/vacancy sensors, and 1 Radio Powr Savr daylight sensor.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Various operating voltages available
• Capable of switching general-purpose loads
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy/vacancy sensors, and 1 Radio Powr Savr daylight sensor

This is a Vive PowPak Relay Module w/ Softswitch & Occupancy-Status. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak Relay Module w/ Softswitch & Occupancy-Status receives up to 10 Pico remote controls, 10 Radio Powr Savr occupancy/vacancy sensors, and 1 Radio Powr Savr daylight sensor.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Various operating voltages available
• Capable of switching general-purpose loads
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy/vacancy sensors, and 1 Radio Powr Savr daylight sensor

This is a Vive PowPak Dimming Module. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak Dimming Module provides switching up to 8 A load and configurable with high and low end trim.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Controls up to 60 mA of 0 –10 VDC controlled fixtures together
• Switches up to 8 A total
• Configurable high- and low-end trim
• Various operating voltages available

This is a Vive PowPak Dimming Module. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak Dimming Module provides switching up to 8 A load and configurable with high and low end trim.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Controls up to 60 mA of 0 –10 VDC controlled fixtures together
• Switches up to 8 A total
• Configurable high- and low-end trim
• Various operating voltages available

This is a Vive PowPak CCO Module (Dry Contact). The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak CCO Module (Dry Contact) provides low-voltage radio frequency control.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

• Plug may be used with standard receptacles and with new receptacles designed for dimming use
• Plug is compatible with 18 AWG (0.75 mm2 ) SPT-2 lamp cords
• Plug uses split-shell design for easy wiring and the ability to control cord exit direction
• Compliant with article 406.11 of the 2008 National Electric Code (NEC)

This is the RadioRA 2 RF plugin appliance module. RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect RF Technology. They can be hidden behind furniture or appliances. The RadioRA 2 Dimming Module (RR-3PD-1) functions much like standard lamp dimmers, but also incorporates advanced features such as fade on/fade off, delayed long fade off, and rapid full on. Check out the RadioRA 2 products page here.

• On a single-tap of the toggle button, load toggles ON or OFF.
• The appliance module may be used with, but is not limited to, the following: Task lighting or Humidifiers Note: Refer to the manufacturer’s guidelines for acceptable switching methods.
• The appliance module may NOT be suitable for use with devices that require any of the following: Shut-down process before power is interrupted, such as computers. Cool-down process before power is interrupted, such as projectors. Programming, such as clocks or DVRs. Long warm-up cycle.
• If an over-temperature condition is detected, the LED on the unit will flash a unique sequence (double-blink, then pause) and turn the load off. Proper installation and conformance to all specifications should be ensured before proceeding. To return the device to normal operation, cycle power to the device.

This is the RadioRA 2 RF plugin dimming module. RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect RF Technology. They can be hidden behind furniture or appliances. The RadioRA 2 Dimming Module (RR-3PD-1) functions much like standard lamp dimmers, but also incorporates advanced features such as fade on/fade off, delayed long fade off, and rapid full on. Check out the RadioRA 2 products page here.

• On a single-tap of the toggle button, lights fade ON or OFF.
• On a double-tap of the toggle button, lights go to full ON.
• When ON, press and hold the toggle button to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the raise/lower buttons until the desired light level is reached.
• Control non-dimmable lighting loads in switching mode.

This is the RadioRA 2 auxiliary repeater. RadioRA® 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems. For systems that extend up to 30 ft. (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft. (9 m), covering a total area of approximately 2500 ft2 (232 m2). Check out the RadioRA 2 products page here.

• Test button: enters the system diagnostic mode.
• Can be programmed from a PC.
• RS485 port to connect to other Repeaters through a wired link (daisy-chain).
• Main Repeaters allow configuration and integration to the system through Ethernet or RS232 ports.
• System with 2 Main Repeaters must be connected via Ethernet.

This is the RadioRA 2 main repeater. RadioRA® 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems. For systems that extend up to 30 ft. (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft. (9 m), covering a total area of approximately 2500 ft2 (232 m2). Check out the RadioRA 2 products page here.

• Test button: enters the system diagnostic mode.
• Can be programmed from a PC.
• RS485 port to connect to other Repeaters through a wired link (daisy-chain).
• Main Repeaters allow configuration and integration to the system through Ethernet or RS232 ports.
• System with 2 Main Repeaters must be connected via Ethernet.

• Supports up to 100 wireless devices (including select RadioRA 2 dimmers and switches, Pico wireless controls, and wireless shades). The main repeater and additional wireless repeaters each count as one device.
• Programmed via the Lutron App (available for iOS® and AndroidTM).
• Scene control via the Lutron App and Pico scene keypads.
• Timeclock scheduling of daily events via the Lutron App.
• Connects to the Wi-Fi router via an Ethernet connection.
• Local device operation will continue to function if internet connection is lost or if the main repeater is powered down or not communicating.
• System access from anywhere in the world using the Lutron App.
• Control outside the app via widgets (iOSR and AndroidT).
• Supports Geofencing from the Lutron App.
• Control from Apple Watch.
• Supports integration with other smart home brands including Amazon® Alexa®, Google® Assistant, Nest®, Sonos®, and more.
• Up to 4 wireless repeaters can be added to extend the range for larger systems.
• Automatically programs Pico wireless controls for typical applications and activities or program additional custom scenes using the Lutron App.
• Integration with select professional A / V and security systems.

This is the RadioRA 2 tabletop designer keypad. RadioRA® 2 Tabletop Designer Keypads provide homeowners with a simple and elegant way to operate lights, shade / draperies, motorized screens, and many other devices. RadioRA® 2 Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the Keypads readable any time of the day or night. The Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. The versatile design of RadioRA® 2 Tabletop Designer Keypads allows them to be mounted on a wall, placed on top of a table, or used as a cordless Keypad. The Keypads can be powered by a DC adapter (see Low-Voltage Transformer spec P/N 369561, included with -RR models) or with 2 AAA batteries. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades / draperies open or close to desired positions.
• Light levels and shade / drapery positions can be fi ne-tuned by pressing and holding the raise / lower buttons.
• Programmable to select whole-house or single room preset levels or positions.
• Adjustable backlight intensity. Design Features
• Prepaid engraving included. Redeemable for one engraved button kit.
• Two “Wake-up” options for cordless operation: — “Wake-up and Activate” (default) – Single button press will “wake up” and activate selected button. — “Wake-up Only” – Single button press will “wake-up” and show status. Subsequent press will activate button.