• Works with Pico remote controls
• Works with the Lutron App
• Lutron patented Clear Connect RF Technology works through walls and floors
• Installation requires neutral wire
• Low minimum load requirement

DIMMER

• Doesn’t require a neutral wire—ideal for retrofit or new construction
• No polarity for line or load wiring—mistake-proof wiring
• Works with compatible dimmable LEDs (up to 150W), and incandescent and halogen bulbs (up to 600W)
• Use Pico remotes for additional dimmers in multi-location dimming applications

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

Mounting Considerations:

• Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception.
• All RF devices must be mounted on non-conductive materials to ensure proper performance.
• If you wish to mount your PicoR wireless control to a metal surface, the PICO-MOUNT-1-XX-CPN5733 will be required in order to maintain proper RF performance.

**Stand Alone Mounting Adhesive-Mount (included with Pico® wireless control)

**Screw-Mount (sold separately): Model: PICO-SM-KIT

• Note: Kit includes special screws to be used for more permanent mounting and / or for non-smooth surfaces.

This is a Pico Wireless Control 2 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 2 button w/ raise/lower. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 3 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 3 button w/ raise/lower. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This the 2 button Pico wireless control w/ nightlight. Check out the RadioRA 2 products page here.

• Provides control for the following:
  • Maestro WirelessR controls
  • PowPakR Modules
  • Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM)
  • GRAFIK EyeR QS wireless systems
  • RadioRAR 2 systems
  • HomeWorksR QS wireless systems
  • CasetaT Wireless dimmers
• Battery-powered. Requires no wiring.

PP and UPP 1 Series Power Packs provide both the 24 V- power supply to operate Lutron® wired occupancy sensors, as well as the 16 A line-voltage relay to control the load, in one compact housing. The unit can be mounted inside a ballast enclosure or inside / outside a junction box. The manual-ON Power Pack (-DV-M) is used to provide a vacancy-only solution (not configurable for occupancy behavior) when paired with Lutron® wired occupancy sensors. A low-voltage momentary switch should be used to manually turn ON the load while the sensor automatically shuts the load OFF when unoccupied. Pressing the momentary switch can also turn the load OFF. The auxiliary Power Pack (-SH) must be used in conjunction with at least one line-voltage Power Pack and one Lutron wired occupancy sensor to switch additional loads.

Features

• High-impact UL94 flammability-rated plastic case construction
• Relay: Class B 266 °F (130 °C) insulating material; silver alloy contacts
• Power Pack units (PP-DV / UPP-DV, PP-347H, PP-DV-M / UPP-DV-M) power up to 3 total devices. PP-SH / UPP-SH counts as 1 device; each occupancy sensor counts as 1 device.
• For indoor use only, 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing