LC&D GR1416LT Blue Box Relay Panel

• Master Panel in Surface Mount Enclosure
• Modem not included
• Order Pre-Programmed for Easy No Hassle Installation (fees apply)
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 16 Relays (included)
• Switching only (no dimming)
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is a complete basic system and does not include modem or other accessories. For custom options check out our customizer here.

For more information visit the Acuity website here.

This is the 32 relay master LC&D lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support (order with Modem)
• 32 Relay Panel is Pre-Programmed by Factory for Easy No Hassle Installation
• Programmable through Unity 2 Software (through a PC)
• 100% Digital 32 Channel Astronomical Time Clock
• 32 Relays (Relay Options Available)
• Link Multiple Panels and Switches via Cat 5 Cable
• Link up to 127 Addresses of Digital Devices via Cat. 5 Cable with RJ45 Connectors up to 4,000 Ft

This is the 48 relay master LC&D lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support (order with Modem)
• 48 Relay Panel is Pre-Programmed by Factory for Easy No Hassle Installation
• Programmable through Unity 2 Software (through a PC)
• 100% Digital 32 Channel Astronomical Time Clock
• 48 Relays (Relay Options Available)
• Link Multiple Panels and Switches via Cat 5 Cable
• Link up to 127 Addresses of Digital Devices via Cat. 5 Cable with RJ45 Connectors up to 4,000 Ft

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

This is the Replacement Flush-mount Installation Adapter for Lutron Vive system. It requires a 6 in (153 mm) hole to be cut in the ceiling for mounting. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.

Sensors can be assigned to multiple switches.

This is the Replacement Surface-mount Installation Adapter for Lutron Vive system. It has Knockouts for 3/4 in (19 mm) conduit. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.

Sensors can be assigned to multiple switches.

This is the Intuity WiFi RFLC Bridge. The WiFi to RFLC Bridge enables the Intuity Automation Controller to operate compatible Legrand RFLC lighting devices. Mounting to a single gang wall box and communicating via WiFi to the Intuity HA7000, the WiFi to RFLC Bridge allows control using Legrand’s proprietary Top Dog technology.

Everyone wants a home that’s a step above ordinary. Now the radiant ® collection of switches, outlets, dimmers and home automation controls by Legrand puts that stylish finishing touch affordably within reach. radiant gets rid of unsightly screws, delivering clean looks in a range of colors and metallic finishes. Put more modern convenience at your fingertips. Go more radiant. Check out the radiant collection.

This is the Vive Wireless Hub. The Vive hub provides a connection point for Lutron Vive devices such as PowPak wireless dimming and switching modules, PowPak Wireless Fixture Controllers, PowPak 20 A Relay Modules, Maestro Wireless dimmers and switches, Pico remote controls, Radio Powr Savr occupancy sensors, and daylight sensors. For a complete list of compatible devices, see spec sheet (downloadable PDF). Click here to see the Lutron Vive story.

Features:

• Communicates with controls on a floor using Lutron wireless Clear Connect technology (range radius of 71 ft [22 m]).
• Distributed system architecture. Wireless sensors and controls must be located within 60 ft. (18 m) line of sight, or 30 ft. (9 m), through walls, of the associated device.
• Supports timeclock events based on both sunrise and sunset or fixed time-of-day.
• Integrated multi-color LED provides feedback on what mode the hub is in.
• Contact Closure Inputs for integration with devices by others including devices for Title 24 Automatic Demand Response

Long, narrow PIR detection for control of hallway lighting.

• 100% Digital PIR detection
• Coverage up to 130 ft. (39.62m)
• Push button programmable
• Adjustable time delays
• Convenient test mode
• No field calibration or sensitivity adjustments required
• 100 hr. lamp burn-in timer
• Recommended Power Pack: PP20

• Supports up to 50 wireless devices (Caséta Wireless dimmers, plug-in dimmers, and switches, PicoR remote controls, wireless shades). Smart Bridge/Smart Bridge PRO counts as one device.
• Programmed via the Lutron App (available for iOS and Android).
• Scene control via the Lutron App.
• Timeclock scheduling of daily events via the Lutron App.
• Connects to Wi-Fi router via Ethernet.
• Local device operation will continue to function if internet connection is lost or Smart Bridge/Smart Bridge PRO is powered down or not communicating.
• System access from anywhere in the world using the Lutron App.
• Supports Caséta Wireless devices, Serena shades, and Pico remote controls.
• Control outside the app via widgets (iOS and Android).
• Supports Geofencing from the Lutron App.
• Control from Apple Watch.
• Supports Siri and Apple HomeKit technology.