This is the 0-10 volt dimming room controller. LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a high-efficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent). They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• 0-10V signal opens on loss of LMRC power
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the digital forward phase dimming room controllers (LMRC-221, LMRC-222). LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• Square law, 2-wire and 3-wire fluorescent/LED curves
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• RoHS compliant

Wallbox Power Module

The Wallbox Power Module controls up to six zones of light and will operate the following sources with a continuous Square Law dimming curve or on a full conduction non-dim basis:

Check out the RadioRA 2 collection here.

• Incandescent
• LED
• Tungsten Halogen
• Electronic Low-Voltage (ELV)
• Magnetic Low-Voltage (MLV) Transformer
• Metal Halide / High Pressure Sodium Switched
• Neon/Cold Cathode
• LutronR Tu-WireR Electronic Fluorescent Dimming Ballasts
• Approved LED and CFL lamps / fixtures
• Up to 64 DALI compliant output devices (devices must comply with IEC/EN 60929) can be addressed and grouped into zones (LQRK-WPM-6D and LQR-WPM-6D only). The Power Module can be configured for wired, QS link (HomeWorksR QS only), or wireless, RF link (HomeWorksR QS and RadioRAR 2), communication.

This is the RadioRA 2 visor control transmitter. RadioRA 2 Visor Controls allow lights, shades /draperies, and other equipment to be controlled from the car with just a touch of a button on a Visor Control Transmitter or a HomeLink® compatible visor control. Up to ten (10) Transmitters can be used with a Visor Control Receiver. Pre-printed and blank labels are included with the Visor Controls for naming scenes or buttons on both the Receiver and the Transmitter. Check out the RadioRA 2 products page here.

• Each output can be controlled locally at the Receiver or remotely by a Transmitter or keypad button.
• The Receiver ‘Keypad’ or ‘Inputs’ buttons can be programmed to light and shades /draperies. Design Features
• Full or Flash security options.
• The Transmitter can remotely control the ‘Keypad’, ‘Security Input’, and ‘Outputs’ buttons on the Receiver.
• RR-VCRX-WH:  Visor Control Receiver (Sold Separately)

This is the HVAC Controller & Wireless Temperature Sensor. Check out the RadioRA 2 collection here.

System package includes:
-1 HVAC Controller
-1 Wireless Temperature Sensor*
– 1 Wired Return Air Duct Sensor

The is the °F seeTEMP Wall Control, HVAC controller & Wireless Temperature Sensor. Check out the RadioRA 2 collection here.

System package includes:
-1 HVAC Controller
-1 seeTemp Wall Display (°F) (WH)
-1 Wireless Temperature Sensor (SW)
– 1 Wired Return Air Duct Sensor

This is the Flush Mount Temperature Sensor. Check out the RadioRA 2 collection here.

This is the seeTemp Wall Display °C. Check out the RadioRA 2 collection here.

• Designer or Architectural style opening that can be ganged with other devices like dimmers and keypads.
• Installs in a standard wallbox for low-profile appearance.
• Multiple seeTemp TM Wall Displays can be used to control 1 HVAC Controller or TouchPRO Wireless TM Thermostat from multiple locations.

This is the seeTemp Wall Display Fahrenheit. Check out the RadioRA 2 collection here.

• Designer or Architectural style opening that can be ganged with other devices like dimmers and keypads.
• Installs in a standard wallbox for low-profile appearance.
• Multiple seeTemp TM Wall Displays can be used to control 1 HVAC Controller or TouchPRO Wireless TM Thermostat from multiple locations.

This is the Radio Powr Savr Wireless Daylight Sensor. The LutronR wireless daylight sensor is a battery-powered sensor that automatically controls lights via RF communication to compatible dimming or switching devices. This sensor mounts to the ceiling and measures light in the space. The sensor then transmits the light level to the associated dimming or switching devices that automatically control the lights to balance light level in the space. The sensor combines both convenience and exceptional energy savings potential along with ease of installation. Check out the RadioRA 2 products page here.

• Auto-On Low-Light feature will turn lights on automatically only if there is less than approximately 10 Lux (1 fc) of ambient light
• Passive infrared motion detection with exclusive Lutron XCT TM Technology for fine motion detection
• Simple adjustments available for Timeout, Auto-On, and Activity settings
• Supports advanced occupancy features, such as dependent occupancy groups and customizable occupied/unoccupied presets in some systems
• Multiple sensors can be added for extended coverage
• Lens illuminates during test mode to verify ideal locations

This is the RadioRA 2 wireless temperature sensor. Check out the RadioRA 2 products page here.

• No wires—5 year battery life
• If more than one sensor is associated with an HVAC controller, temperatures are averaged
• Communicates via Lutron Clear Connect RF Technology
• Compatible only with the HVAC controller
• Maximum of 5 wireless temperature sensors per RadioRA 2 main repeater or HomeWorks QS RF link