1

CD3FB103P277X – TITAN SERIES FLUORESCENT 3 WIRE DIMMER

|
TITAN SERIES FLUORESCENT 3 WIRE DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 3 wire dimmer. Check out the Pass & Seymour products.

  • For use with 3 wire 120V and 277V fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Simple to plan the rough-in.
  • Available in single pole slide-to-OFF and single pole/3-way preset models.
  • Attractive European styling. Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.
  • 10A / 277V preset dimmer.


CD3FB163P277X – TITAN SERIES FLUORESCENT 3 WIRE DIMMER

|
TITAN SERIES FLUORESCENT 3 WIRE DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 3 wire dimmer. Check out the Pass & Seymour products.

  • For use with 3 wire 120V and 277V fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Simple to plan the rough-in.
  • Available in single pole slide-to-OFF and single pole/3-way preset models.
  • Attractive European styling. Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.
  • 16A / 277V preset dimmer.


CD3FB16X – TITAN SERIES FLUORESCENT 3 WIRE DIMMER

|
TITAN SERIES FLUORESCENT 3 WIRE DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 3 wire dimmer. Check out the Pass & Seymour products.

  • For use with 3 wire 120V and 277V fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Simple to plan the rough-in.
  • Available in single pole slide-to-OFF and single pole/3-way preset models.
  • Attractive European styling. Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.
  • 10A / 277V dimmer


CD4FB3P – TITAN SERIES FLUORESCENT 3-WAY, PRESET 4 WIRE DIMMER

|
TITAN SERIES FLUORESCENT 3-WAY, PRESET 4 WIRE DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 3-way, preset 4 wire dimmer. Check out the Pass & Seymour products.

  • For use with 0-10V, 4 wire, 120V and 277V fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Must be used with power pack.
  • Simple to plan the rough-in.
  • Single pole/3-way preset.
  • Attractive European styling. Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.


CD4FBL3P – TITAN SERIES LED 4-WIRE SINGLE-POLE/3-WAY PRESET DIMMER

|
TITAN SERIES LED 4-WIRE SINGLE-POLE/3-WAY PRESET DIMMER, LIGHTING CONTROLS

This is the Titan series LED 4-wire single-pole/3-way preset dimmer. Check out the Pass & Seymour products.

  • Includes integrated power pack and blank center plate.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end trim.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Simple to plan the rough-in.


CD4FBX – TITAN SERIES FLUORESCENT 4 WIRE DIMMER

|
TITAN SERIES FLUORESCENT 4 WIRE DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 4 wire dimmer. Check out the Pass & Seymour products.

  • For use with 0-10V, 4 wire, 120V and 277V fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Must be used with power pack.
  • Simple to plan the rough-in.
  • Single pole/3-way preset.
  • Attractive European styling. Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.


CD700 – TITAN SERIES INCANDESCENT DIMMER

|
TITAN SERIES INCANDESCENT DIMMER, LIGHTING CONTROLS

This is the Titan series incandescent dimmer. Check out the Pass & Seymour products.

  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable top end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of de-rating when ganged.
  • Simple to plan the rough-in.
  • Single pole slide-to-off
  • Attractive European styling.
  • Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.
  • 700W / 120V slide dimmer


CD703P – TITAN SERIES INCANDESCENT 3-WAY PRESET DIMMER

|
TITAN SERIES INCANDESCENT 3-WAY PRESET DIMMER, LIGHTING CONTROLS

This is the Titan series incandescent 3-way preset dimmer. Check out the Pass & Seymour products.

  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable top end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of de-rating when ganged.
  • Simple to plan the rough-in.
  • Single pole 3-way preset
  • Attractive European styling.
  • Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan™ wall plate system.
  • Blank center plate included.
  • 700W / 120V slide dimmer


CDADAPTORKIT – TITAN SERIES ADAPTER KIT

|
TITAN SERIES ADAPTER KIT, LIGHTING CONTROLS

This is the Titan series adapter kit. This product allows for P&S switches, P&S receptacles, P&S GFCI’s, and P&S commercial network wiring keystone products to be multi-ganged with Titan commercial dimmers. This adapter kit will allow for any combination of Titan dimmers and P&S wiring devices to be ganged together. Using a vise or heavy-duty pliers, remove the fins on either or both sides of the heat sink, or sub-plate as necessary. Check out the Pass & Seymour products.



CDDH16 – TITAN SERIES FAN SPEED CONTROL

|
TITAN SERIES FAN SPEED CONTROL, LIGHTING CONTROLS

This is the Titan series fan speed control. Check out the Pass & Seymour products.

  • Field configurable wall plate system.
  • Labeling system.
  • Shipped with protective film.
  • Rugged construction.
  • Simple to plan the rough-in.
  • Attractive European styling.
  • Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan wall plate system.
  • Blank center plate included.
  • 1.6A / 120V Dehummer fan speed control.


CDFB10277 – TITAN SERIES FLUORESCENT 2 WIRE DIMMER

|
TITAN SERIES FLUORESCENT 2 WIRE DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 2 wire dimmer. Check out the Pass & Seymour products.

  • For use with 2 wire 120V and 277V fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Simple to plan the rough-in.
  • Attractive European styling.
  • Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan wall plate system.
  • Blank center plate included.
  • 10A / 277V slide dimmer


CDFB103P – TITAN SERIES FLUORESCENT 2 WIRE 3-WAY DIMMER

|
TITAN SERIES FLUORESCENT 2 WIRE 3-WAY DIMMER, LIGHTING CONTROLS

This is the Titan series fluorescent 2 wire 3-way dimmer. Check out the Pass & Seymour products.

  • For use with 2 wire 120V  fluorescent dimming ballasts.
  • Field configurable wall plate system.
  • Labeling system.
  • Adjustable low end output voltage.
  • Shipped with protective film.
  • Rugged construction.
  • Superior ratings with a minimum of derating when ganged.
  • Simple to plan the rough-in.
  • Attractive European styling.
  • Eye-catching packaging.
  • Exclusive adaptor kit to install other Decorator opening devices under the Titan wall plate system.
  • Blank center plate included.
  • 10A / 120V slide dimmer