20 Amp Tamper Resistant GFCI Receptacle

Features

• Continuous self-test functionality – disconnects power to receptacle if critical components are damaged and GFCI protection is lost – providing “continuous self-testing” that initiates within 2.5 seconds and is a continuous cycle every 30 seconds or less.
• There are three provisions for providing protection with this 20 Amp Tamper Resistant GFCI Receptacle:

– Continuous electronic sensing, testing and evaluation utilizing diagnostic software located on the printed circuit board.

– Traditional testing mode by manually operating the “test and reset” buttons utilizing a supervisory circuit as specified in UL 943 section 5.15.

– Auto-sensing mode for immediate interruption for a ground fault condition for Class A protection (4 – 6 mA).

• Manual Test – this design incorporates a full system test function. The GFCI, when manually tested, induces a simulated ground fault leakage current to the printed circuit board. This in turn causes the mechanical system to react based on the action of the solenoid. The entire mechanical and electronic GFCI system is reviewed for functionality.
• Reverse wire safety feature – if wired incorrectly there will be no power to the face or to downstream receptacles for added safety.
• Clear visual indication of GFCI status — LED indicating lights:

– Green LED (power to the device)

– Red LED (trip condition/ground fault condition)

– Flashing Red LED (end of life)

• Permanently installed internal tamper-resistant shutter mechanism capable of resisting insertion of foreign elements into the device.
• Internal back wiring clamp and guide pocket — quick and dependable termination.
• Receptacle face compatible with NEMA designer and NovaT designer-opening wallplates.
• Compliant with NEC 406.12 and NEC 517-18(c).

This the LC&D current limiting panel. The SilverBullet is a “sub-branch circuit current limiter” for track lighting that enforces a definite current limit to lower the VA rating of each track lighting circuit and meet code requirements. Check out our Acuity products here.

• Current limiting for up to 21 circuits
• Current limiting breakers available from 1A-15A
• AIC rating of 10,000A @ 120V – 277V
• Factory pre-assembled with each load factory labeled on the door sheet
• Each Panel is Manufactured per your specifications
• Allow 10 – 15 business days for your order to be built.

This is the smart micro ambient/occupancy sensor.

• Integrate occupancy detection and ambient light control in one common sensor.
• Part of Touché’s Smart Bus devices.
• No programming or configuration is required.
• No dip switches or dials for configuration.
• Can be installed as surface mounted devices for hard ceiling (drywall ceilings) applications or flush mounted in drop or lay-in ceiling applications.

Sunpark 3-4082D Decorative Wall Lamp. The Sunpark 3-4082D is designed for exterior applications in residential locations. The outdoor wall mount fixture in black powder-coated finish features die-cast aluminum construction and a polycarbonate lens for a fresh modern look.  The polycarbonate lens with aluminum housing allows for uniform lighting distribution.  This wall mount fixture features an optional built-in photocell.  Photocells improve the security and safety of your home, automatically turning on lights when it gets dark. Installation is traditional, quick and easy! This light comes in tw0 wattages with their corresponding light outputs, so you can use the same size fixture in different mounting heights and keep the lighting cohesive on your home!

Features

Housing: Die-cast Aluminum with Powder Coated Finish

Finish Option: -05 Black

Electrical: High Power Factor, Low THD Built-in with or without Photo Cell

Built-in LED Module: 11W provides 500 lumens | 15W provides 850 lumens More Color Temperature Option – 3000K, 4000K

LED Driver: 120v onboard driver

Energy Star: Yes

Certification: UL/cUL or ETL/cETL Listed, Suitable for Wet Locations

Warranty: 5 Years Warranty on LED Driver and Module

For other items like the Sunpark 3-4082D Decorative Wall Lamp click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark 3-4310D Decorative Outdoor LED. The Sunpark 3-4310D is designed for exterior applications in residential locations.  This fixture is suitable for porches, breezeways, and walkways. The outdoor wall mount fixture with grey powder coated finish features die-cast aluminum construction and an opal polycarbonate lens for a fresh modern look.  The opal polycarbonate lens with aluminum housing allows for uniform lighting distribution.  This wall mount fixture features an optional built-in photocell.  Photocells improve the security and safety of your home, automatically turning on lights when it gets dark. Installation is traditional, quick and easy! This light comes in tw0 wattages with their corresponding light outputs, so you can use the same size fixture in different mounting heights and keep the lighting cohesive on your home!

Features

Housing: Die-Cast Aluminum with Powder Coated Finish

Finish Option: -05 Black, -08 Gray

Optical Diffuser: Opal Polycarbonate

Dimensions: 14.1″ x 10.0″ x 5.7″

Electrical: 120V; built-in photocell option

Lamp: LED Type: Integrate LED Module, Color Temperature 3000K, 4000K

Certification: UL/cUL, ETL/cETL Listed, Suitable for Wet Locations

Warranty
5 Years Limited Warranty on Driver and LED

For other items like the Sunpark 3-4310D Decorative Outdoor LED click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark BH3D 4000K Outdoor Light.  The BH3D is ideal for outdoor and indoor wet locations at multifamily, commercial, and industrial applications. This fixture is suitable for parking structures, parking awnings, breezeways, exterior walkways, and more. The fixture provides excellent light distribution and uniformity. This light source is more energy-efficient than traditional High-intensity discharge lamps or metal-halide lamps. Also, they are durable and can provide light for longer hours. This light fixture is sealed and gasketed and provides general illumination for indoor and outdoor environments where exposure to water, humidity, and dust is likely to occur. These luminaires are usually mounted on ceilings, soffits, walls, or in any other commercial and industrial building or facility where exposure to water or dust (or other elements) is a concern.

Features

Housing: Injection Molding with Polycarbonate Ideal for Harsh Environment Applications

Optical Shade: Injection Molding with Polycarbonate

LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light

Electrical: 120V

LED Type: Integrate LED Module

Certification: UL/cUL, ETL/cETL Listed, Wet Location Rated

Warranty: 5 Years Limited Warranty on Driver and LED

For other items like the Sunpark BH3D 4000K Outdoor Light click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark DC010D-2G LED Ceiling Mount. The DC010D-2G is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, pantries, offices, hallways, and much more!  The circular fixture is ideal for dry or damp locations and provides uniform light distribution. Two different lighting color temperatures give users options for different applications while maintaining the same aesthetic. The satin nickel finish is also available with Sunpark’s vanity lights and wall sconces, so the aesthetic of your home between rooms will be cohesive. Installation is traditional, quick and easy.

Features

Housing: Die-formed Cold-rolled Steel

Finish Option: -62 Satin Nickel

Optical Shade: High Transmission Acrylic Create Excellent Light Distribution and Uniformity

Electrical: High Power Factor ( > 0.95), Low THD ( < 20%)

Built-in LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light. 18W provides 1340 Lumens

LED Driver: 120v onboard LED

Color Temperature Option – 3000K, 4000K

Certifications: ETL/cETL Listed, Suitable for Damp Locations

Warranty: 5 Years Warranty on Driver and LED Module

Suitable for new construction or remodel

*Other finishes are available by special order

For other items like the Sunpark DC010D-2G LED Ceiling Mount Light click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark DC012D-2G-62 LED Ceiling Mount. The DC012D-2G is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, pantries, offices, hallways, and much more!  The circular fixture is ideal for dry or damp locations and provides uniform light distribution. Multiple lighting color temperatures give users options for different applications while maintaining the same aesthetic. The satin nickel finish is also available with Sunpark’s vanity lights and wall sconces, so the aesthetic of your home between rooms will be cohesive. Installation is traditional, quick and easy.

Features

Housing: Die-formed Cold-rolled Steel
Pendant Type: 2 Options

Finish Option: -62 Satin Nickel

Optical Shade: High Transmission Acrylic Create Excellent Light Distribution and Uniformity

Electrical: High Power Factor ( > 0.95), Low THD ( < 20%)

Built-in LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light.

LED Driver: 120v onboard LED

Color Temperature Option – 3000K, 4000K

MCT Type: Get Preferable Fixture Color Temperature by Slide Switch on LED Board
Color Temperature Option – 3000K, 3500K, 4000K

Certifications: ETL/cETL Listed, Suitable for Damp Locations

Warranty: 5 Years Warranty on Driver and LED Module

Suitable for new location or remodel

*Other finishes are available by special order

For other items like the Sunpark DC012D-2G-62 LED Ceiling Mount Light click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark DC014D-2G-MCT-62 LED Ceiling Mount. The DC014D-2G-MCT is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, pantries, offices, hallways, and much more!  The circular fixture is ideal for dry or damp locations and provides uniform light distribution. Multiple lighting color temperatures give users options for different applications while maintaining the same aesthetic. The satin nickel finish is also available with Sunpark’s vanity lights and wall sconces, so the aesthetic of your home between rooms will be cohesive. Installation is traditional, quick and easy.

Features

Housing: Die-formed Cold-rolled Steel
Pendant Type: 2 Options

Finish Option: -62 Satin Nickel

Optical Shade: High Transmission Acrylic Create Excellent Light Distribution and Uniformity

Electrical: High Power Factor ( > 0.95), Low THD ( < 20%)

Built-in LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light.

LED Driver: 120v onboard LED

MCT Type: Get Preferable Fixture Color Temperature by Slide Switch on LED Board
Color Temperature Option – 3000K, 3500K, 4000K

Certifications: ETL/cETL Listed, Suitable for Damp Locations

Warranty: 5 Years Warranty on Driver and LED Module

Suitable for new location or remodel

*Other finishes are available by special order

For other items like the Sunpark DC014D-2G-MCT-62 LED Ceiling Mount Light click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark DC016D-2G-MCT-62 LED Ceiling Mount. The DC016D-2G-MCT is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, pantries, offices, hallways, and much more!  The circular fixture is ideal for dry or damp locations and provides uniform light distribution. Multiple lighting color temperatures give users options for different applications while maintaining the same aesthetic. The satin nickel finish is also available with Sunpark’s vanity lights and wall sconces, so the aesthetic of your home between rooms will be cohesive. Installation is traditional, quick and easy.

Features

Housing: Die-formed Cold-rolled Steel
Pendant Type: 2 Options

Finish Option: -62 Satin Nickel

Optical Shade: High Transmission Acrylic Create Excellent Light Distribution and Uniformity

Electrical: High Power Factor ( > 0.95), Low THD ( < 20%)

Built-in LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light.

LED Driver: 120v onboard LED

MCT Type: Get Preferable Fixture Color Temperature by Slide Switch on LED Board
Color Temperature Option – 3000K, 3500K, 4000K

Certifications: ETL/cETL Listed, Suitable for Damp Locations

Warranty: 5 Years Warranty on Driver and LED Module

Suitable for new location or remodel

*Other finishes are available by special order

For other items like the Sunpark DC016D-2G-MCT-62 LED Ceiling Mount Light click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark DC018D-2G-62 LED Ceiling Mount. The DC018D-2G is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, pantries, offices, hallways, and much more!  The circular fixture is ideal for dry or damp locations and provides uniform light distribution. Multiple lighting color temperatures give users options for different applications while maintaining the same aesthetic. The satin nickel finish is also available with Sunpark’s vanity lights and wall sconces, so the aesthetic of your home between rooms will be cohesive. Installation is traditional, quick and easy.

Features

Housing: Die-formed Cold-rolled Steel
Pendant Type: 2 Options

Finish Option: -62 Satin Nickel

Optical Shade: High Transmission Acrylic Create Excellent Light Distribution and Uniformity

Electrical: High Power Factor ( > 0.95), Low THD ( < 20%)

Built-in LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light.

LED Driver: 120v onboard LED

Color Temperature Option – 3000K, 4000K

MCT Type: Get Preferable Fixture Color Temperature by Slide Switch on LED Board
Color Temperature Option – 3000K, 3500K, 4000K

Certifications: ETL/cETL Listed, Suitable for Damp Locations

Warranty: 5 Years Warranty on Driver and LED Module

Suitable for new location or remodel

*Other finishes are available by special order

For other items like the Sunpark DC018D-2G-62 LED Ceiling Mount Light click here.

For more information on Sunpark’s line of lighting solutions click here.

Sunpark DC032D-62 LED Ceiling Mount. The DC032D-62 is ideal for indoor applications at residential and commercial locations. This fixture is suitable for kitchens, dining rooms, bathrooms, laundry rooms, offices, and much more!  The oval fixture is ideal for dry or damp locations and provides uniform light distribution. Multiple lighting color temperatures give users options for different applications while maintaining the same aesthetic. The satin nickel finish is also available with Sunpark’s vanity lights and wall sconces, so the aesthetic of your home between rooms will be cohesive. Installation is traditional, quick and easy.

Features

Housing: Die-formed Cold-rolled Steel

Finish Option: -62 Satin Nickel

Optical Shade: High Transmission Acrylic Create Excellent Light Distribution and Uniformity

Electrical: High Power Factor, Low THD

Built-in LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light

Color Temperature Option – 3000K, 4000K

CFL Type: Circline or T8 Lamp (Color Temperature Option – 2700K, 4000K)

Certifications: UL/cUL or ETL/cETL Listed, Energy Star

Warranty: 5 Years Warranty on Driver and LED Module

Suitable for new location or remodel

*Other finishes are available by special order

For other items like the Sunpark DC032D-62 LED Ceiling Mount Light click here.

For more information on Sunpark’s line of lighting solutions click here.