LAMP DIMMER

• Features two receptacles for simultaneous control of two lamps
• Simply plugs into a standard wall receptacle
• Works with dimmable LEDs (up to 100W)
• Also works with halogen and incandescent bulbs (up to 300W)

• Provides switching of multiple load types, occupancy/vacancy sensing, and daylight harvesting.
• RF Technology works through walls and floors.
• Two-wire switch perfect for retrofit applications.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

• Works with Pico remote controls
• Works with the Lutron App
• Lutron patented Clear Connect RF Technology works through walls and floors
• Dual voltage (120 V~ and 277 V~)
• Simple two-wire installation (no neutral wire required)

• Works with Pico remote controls
• Works with the Lutron App
• Lutron patented Clear Connect RF Technology works through walls and floors
• Installation requires neutral wire
• Low minimum load requirement

DIMMER

• Doesn’t require a neutral wire—ideal for retrofit or new construction
• No polarity for line or load wiring—mistake-proof wiring
• Works with compatible dimmable LEDs (up to 150W), and incandescent and halogen bulbs (up to 600W)
• Use Pico remotes for additional dimmers in multi-location dimming applications

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

Mounting Considerations:

• Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception.
• All RF devices must be mounted on non-conductive materials to ensure proper performance.
• If you wish to mount your PicoR wireless control to a metal surface, the PICO-MOUNT-1-XX-CPN5733 will be required in order to maintain proper RF performance.

**Stand Alone Mounting Adhesive-Mount (included with Pico® wireless control)

**Screw-Mount (sold separately): Model: PICO-SM-KIT

• Note: Kit includes special screws to be used for more permanent mounting and / or for non-smooth surfaces.

This is a Pico Wireless Control 2 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 2 button w/ raise/lower. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.

This is a Pico Wireless Control 3 button. Click here to see the Lutron Vive story.

• Provides control for the following:
  • Caséta Wireless controls
  • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
  • Vive TM systems, including:
  • Maestro Wireless controls
  • PowPak ® modules
  • GRAFIK Eye QS wireless systems
  • HomeWorks QS wireless systems
  • Maestro Wireless controls
  • PowPak modules
  • RadioRA 2 systems
  • Serena RF remote control shades
  • Sivoia QS wireless systems
• Control available in a variety of button marking options.
• Easy reconfiguration for use as:
  • Handheld remote
  • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
  • Car visor control (car visor clip sold separately)
  • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

• The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
• sensors through radio frequency (RF).
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
• Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
• through walls, of a Pico remote control.
• Up to 10 Maestro Wireless controls can be configured to work together.
• Sensors can be assigned to multiple switches.