• The Maestro Wireless solution provides dimming/switching of multiple load types, occupancy/vacancy sensing, daylight harvesting, and high-end trim.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Incorporates advanced features such as fade ON/fade OFF, high-end trim, and rapid full-ON.
• Controls include Front Accessible Service Switch (FASS) for safe lamp replacement.

• The Maestro Wireless solution provides dimming/switching of multiple load types, occupancy/vacancy sensing, daylight harvesting, and high-end trim.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Incorporates advanced features such as fade ON/fade OFF, high-end trim, and rapid full-ON.
• Controls include Front Accessible Service Switch (FASS) for safe lamp replacement.

• Controls CFL, LED, incandescent, and halogen load types
• Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
• 180˚ sensor field-of-view
• Occupancy version can be set to auto-on/auto-off or manual-on/auto-off

• Controls CFL, LED, incandescent, and halogen load types
• Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
• 180˚ sensor field-of-view
• Occupancy version can be set to auto-on/auto-off or manual-on/auto-off

• True multi-location dimming from every location
• Tap on to favorite level; tap off; tap twice for full on
• Touch rocker to adjust light level
• LEDs indicate light level and glow softly in the dark as a locator light
• Delayed off provides light as you exit the room
• Line frequency compensation maintains stable light levels, despite power line frequency and voltage variations
• Programming allows customized functions
• eco-dim®, eco-minderTM and eco-timer models available
• Mechanical air-gap to disconnect load power
• 100% factory tested
• Coordinating Claro®, Satin Colors® and Stainless Steel wallplates only available separately
• Custom engraving available for wallplates

• True multi-location dimming from every location
• Tap on to favorite level; tap off; tap twice for full on
• Touch rocker to adjust light level
• LEDs indicate light level and glow softly in the dark as a locator light
• Delayed off provides light as you exit the room
• Line frequency compensation maintains stable light levels, despite power line frequency and voltage variations
• Programming allows customized functions
• eco-dim®, eco-minderTM and eco-timer models available
• Mechanical air-gap to disconnect load power
• 100% factory tested
• Coordinating Claro®, Satin Colors® and Stainless Steel wallplates only available separately
• Custom engraving available for wallplates

This is the Touche Master Interface.

• Master Interfaces provide coordinated control for all of the system’s connected devices and act as a “gateway” to an Ethernet network.
• Up to (100) directly connected devices can be controlled by one Master Interface. If Multi-Function Interfaces are implemented up to (3200) devices can be controlled by one Master Interface.
• Auto-addressing of all connected devices is coordinated by the Master Interface.
• Both static and dynamic IP addressing is permitted for simple and adaptable setup when Ethernet communication is required.
• The Master Interface monitors the status of all connected devices, displays that information locally, and forwards relevant information to the programming application when appropriate.

• Excellent for residential or commercial applications
• Slide-to-off and preset models available
• Enclosed heat sink for aesthetically pleasing appearance
• Multi-gang alignment for quick and easy installation

This is the 2-Wire Global Photosensor. The Indoor Digital Photosensor has an extended sensitivity range which allows it to be used in almost any location without needing adjustment for the reflectivity of the environment. With a dual housing construction, Indoor Digital Photosensors may be used as a full-sized sensor or separated to reduce its footprint.

• Two-wire photo sensor designed for single-zone outdoor lighting control applications
• Monitored using Digital Time Clock(DTC)
• Sealed housing for operation in wet conditions

This is the LC&D 3 wire interior photocell. Check out our Acuity products here.

• LC&D – 3 Wire Interior Photocell for Daylighting
• Can be used in almost any location without the need to adjust to the reflectivity of the environment
• Standard Ceiling Mount Configuration
• Extended sensitivity range; no adjustment needed
• Ability to be used in both open loop and closed loop applications
• Low Voltage
• Wire into LC&D Blue Box LTD Panel on board Input
• “-TZ” is for the LC&D LTD Panel

• The Caséta Wireless In-Wall Dimmer PRO provides dimming of multiple load types and, when paired with Pico remote controls, allows remote control from anywhere in the space.
• When used with the Lutron Smart Bridge or Smart Bridge PRO, the Caséta Wireless In-Wall Dimmer PRO may be programmed via the Lutron app
• Lutron ® patented Clear Connect ® RF Technology works through walls and floors.
• Neutral-optional dimmer is ideal for retrofit applications when used in two-wire mode