This is the RadioRA 2 visor control transmitter. RadioRA 2 Visor Controls allow lights, shades /draperies, and other equipment to be controlled from the car with just a touch of a button on a Visor Control Transmitter or a HomeLink® compatible visor control. Up to ten (10) Transmitters can be used with a Visor Control Receiver. Pre-printed and blank labels are included with the Visor Controls for naming scenes or buttons on both the Receiver and the Transmitter. Check out the RadioRA 2 products page here.

• Each output can be controlled locally at the Receiver or remotely by a Transmitter or keypad button.
• The Receiver ‘Keypad’ or ‘Inputs’ buttons can be programmed to light and shades /draperies. Design Features
• Full or Flash security options.
• The Transmitter can remotely control the ‘Keypad’, ‘Security Input’, and ‘Outputs’ buttons on the Receiver.
• RR-VCRX-WH:  Visor Control Receiver (Sold Separately)

This is the HVAC Controller & Wireless Temperature Sensor. Check out the RadioRA 2 collection here.

System package includes:
-1 HVAC Controller
-1 Wireless Temperature Sensor*
– 1 Wired Return Air Duct Sensor

The is the °F seeTEMP Wall Control, HVAC controller & Wireless Temperature Sensor. Check out the RadioRA 2 collection here.

System package includes:
-1 HVAC Controller
-1 seeTemp Wall Display (°F) (WH)
-1 Wireless Temperature Sensor (SW)
– 1 Wired Return Air Duct Sensor

This is the Flush Mount Temperature Sensor. Check out the RadioRA 2 collection here.

This is the seeTemp Wall Display °C. Check out the RadioRA 2 collection here.

• Designer or Architectural style opening that can be ganged with other devices like dimmers and keypads.
• Installs in a standard wallbox for low-profile appearance.
• Multiple seeTemp TM Wall Displays can be used to control 1 HVAC Controller or TouchPRO Wireless TM Thermostat from multiple locations.

This is the seeTemp Wall Display Fahrenheit. Check out the RadioRA 2 collection here.

• Designer or Architectural style opening that can be ganged with other devices like dimmers and keypads.
• Installs in a standard wallbox for low-profile appearance.
• Multiple seeTemp TM Wall Displays can be used to control 1 HVAC Controller or TouchPRO Wireless TM Thermostat from multiple locations.

This is the Radio Powr Savr Wireless Daylight Sensor. The LutronR wireless daylight sensor is a battery-powered sensor that automatically controls lights via RF communication to compatible dimming or switching devices. This sensor mounts to the ceiling and measures light in the space. The sensor then transmits the light level to the associated dimming or switching devices that automatically control the lights to balance light level in the space. The sensor combines both convenience and exceptional energy savings potential along with ease of installation. Check out the RadioRA 2 products page here.

• Auto-On Low-Light feature will turn lights on automatically only if there is less than approximately 10 Lux (1 fc) of ambient light
• Passive infrared motion detection with exclusive Lutron XCT TM Technology for fine motion detection
• Simple adjustments available for Timeout, Auto-On, and Activity settings
• Supports advanced occupancy features, such as dependent occupancy groups and customizable occupied/unoccupied presets in some systems
• Multiple sensors can be added for extended coverage
• Lens illuminates during test mode to verify ideal locations

Lutron® wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming or switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings along with ease of installation.

Lutron® wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming or switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings along with ease of installation.

Lutron® wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming or switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings along with ease of installation.

This is the RadioRA 2 wireless temperature sensor. Check out the RadioRA 2 products page here.

• No wires—5 year battery life
• If more than one sensor is associated with an HVAC controller, temperatures are averaged
• Communicates via Lutron Clear Connect RF Technology
• Compatible only with the HVAC controller
• Maximum of 5 wireless temperature sensors per RadioRA 2 main repeater or HomeWorks QS RF link