The LMLS-MB1 and LMLS-MB2 mounting brackets provide the flexibility to mount the LMLS-400 and LMLS-500 Photosensors to walls, skylight wells or J-Boxes. They are specifically designed to be used in conjunction with these Photosensors.
FEATURES:
This is the single zone switching & dimming closed loop digital photosensor. The LMLS-400 is a closed loop photo sensor that measures the ambient light level in order to automatically switch or dim one zone of lighting. It is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers. The LMLS-400 has a photodiode with an extended range of 1-6,553 foot-candles (fc), and photopic correction to mimic the human eye, for precise measurement of visible light. Check out Wattstopper DLM products here.
FEATURES:
**See LMLS MB for mounting bracket options**
This is the multi-zone open loop digital photosensor. The LMLS-500 is an open loop, multi-zone photosensor that measures the daylight contribution in order to automatically switch or dim up to three zones of lighting. It is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers. The LMLS-500 has a photodiode with an extended range of 1-6, 553 footcandles (fc), and photopic correction to mimic the human eye, for precise measurement of visible light. Check out Wattstopper DLM products here.
FEATURES:
This is the PIR ceiling mount occupancy sensor. The LMPC-100 low profile Digital PIR Ceiling Mount Occupancy Sensor uses passive infrared (PIR) technology and one of three lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.
FEATURES:
This is the digital plug load room controller. LMPL-101 Plug Load Room Controllers include a 20-amp relay for on/off control of connected outlets, and a high-efficiency switching power supply. They are part of a WattStopper Digital Lighting Management (DLM) system, and enable energy efficient control of plug loads. Check out Wattstopper DLM products here.
FEATURES:
This is the PIR corner mount occupancy sensor. The LMPX-100 Digital PIR Corner Mount Occupancy Sensor uses passive infrared (PIR) technology and one of four lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.
FEATURES:
This is the 0-10 volt dimming room controller. LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a high-efficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent). They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.
FEATURES:
This is the digital forward phase dimming room controllers (LMRC-221, LMRC-222). LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.
FEATURES:
This is the 5-button scene switch. The LMSW-105 Digital Scene Switch is a low voltage device that sets and recalls preset lighting scenes and raises and lowers lighting levels. It is part of a Digital Lighting Management (DLM) system and controls loads connected to DLM room controllers by accessing four of the 16 scenes available in a DLM local network. Check out Wattstopper DLM products here.
FEATURES:
