This is the Lightcloud gateway. The Gateway is the brain of Lightcloud. It communicates with RAB’s servers via private 3G cellular connection, so no internet access is required. Plus, it features an uninterruptible power supply for added peace of mind.

• Connects with up to 200 Lightcloud devices
• Communicates with Lightcloud devices via 2.4 GHz wireless mesh network
• User-serviceable, built-in UPS battery backup (lasts approximately 2 hours)
• Cloud-based management – no software to install or maintain
• Connects to Lightcloud service using secure cellular 3G connection and no internet access is required
• Easy setup – simply power on, confirm a cellular signal and call 844-LIGHTCLOUD
• To activate, go to lightcloud.com/activate
• Warranty is active as long as service plan is active

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the dual technology high bay occupancy sensor ceiling mount. The Lightcloud Sensor is a dual-technology motion detector that can switch and dim both local and remote circuits. It monitors power consumption, and can send an alert if power is lost. The Sensor is available for both standard and high bay applications, each with the option of surface or fixture mounting.

• Passive infrared motion detector with built-in fixture and zone control
• Occupancy and vacancy sensing with adjustable sensitivity and timeouts
• Switching for a fixture or entire zone, hard-wired or remote
• Supports 0-10V dimming for LED and fluorescent fixtures
• Easily set up schedules and scenes
• Power measurement and energy reporting
• Remote control from Lightcloud web application
• Communicates over secure wireless mesh network – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the dual technology high bay occupancy sensor fixture mount. The Lightcloud Sensor is a dual-technology motion detector that can switch and dim both local and remote circuits. It monitors power consumption, and can send an alert if power is lost. The Sensor is available for both standard and high bay applications, each with the option of surface or fixture mounting.

• Passive infrared motion detector with built-in fixture and zone control
• Occupancy and vacancy sensing with adjustable sensitivity and timeouts
• Switching for a fixture or entire zone, hard-wired or remote
• Supports 0-10V dimming for LED and fluorescent fixtures
• Easily set up schedules and scenes
• Power measurement and energy reporting
• Remote control from Lightcloud web application
• Communicates over secure wireless mesh network – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the dual technology high bay occupancy sensor fixture mount w/ height adjuster. The Lightcloud Sensor is a dual-technology motion detector that can switch and dim both local and remote circuits. It monitors power consumption, and can send an alert if power is lost. The Sensor is available for both standard and high bay applications, each with the option of surface or fixture mounting.

• Passive infrared motion detector with built-in fixture and zone control
• Occupancy and vacancy sensing with adjustable sensitivity and timeouts
• Switching for a fixture or entire zone, hard-wired or remote
• Supports 0-10V dimming for LED and fluorescent fixtures
• Easily set up schedules and scenes
• Power measurement and energy reporting
• Remote control from Lightcloud web application
• Communicates over secure wireless mesh network – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the dual technology lightcloud sensor ceiling mount. The Lightcloud Sensor is a dual-technology motion detector that can switch and dim both local and remote circuits. It monitors power consumption, and can send an alert if power is lost. The Sensor is available for both standard and high bay applications, each with the option of surface or fixture mounting.

• Passive infrared motion detector with built-in fixture and zone control
• Occupancy and vacancy sensing with adjustable sensitivity and timeouts
• Switching for a fixture or entire zone, hard-wired or remote
• Supports 0-10V dimming for LED and fluorescent fixtures
• Easily set up schedules and scenes
• Power measurement and energy reporting
• Remote control from Lightcloud web application
• Communicates over secure wireless mesh network – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the dual technology occupancy sensor fixture mount. The Lightcloud Sensor is a dual-technology motion detector that can switch and dim both local and remote circuits. It monitors power consumption, and can send an alert if power is lost. The Sensor is available for both standard and high bay applications, each with the option of surface or fixture mounting.

• Passive infrared motion detector with built-in fixture and zone control
• Occupancy and vacancy sensing with adjustable sensitivity and timeouts
• Switching for a fixture or entire zone, hard-wired or remote
• Supports 0-10V dimming for LED and fluorescent fixtures
• Easily set up schedules and scenes
• Power measurement and energy reporting
• Remote control from Lightcloud web application
• Communicates over secure wireless mesh network – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the dual technology occupancy sensor fixture mount w/ height adjuster. The Lightcloud Sensor is a dual-technology motion detector that can switch and dim both local and remote circuits. It monitors power consumption, and can send an alert if power is lost. The Sensor is available for both standard and high bay applications, each with the option of surface or fixture mounting.

• Passive infrared motion detector with built-in fixture and zone control
• Occupancy and vacancy sensing with adjustable sensitivity and timeouts
• Switching for a fixture or entire zone, hard-wired or remote
• Supports 0-10V dimming for LED and fluorescent fixtures
• Easily set up schedules and scenes
• Power measurement and energy reporting
• Remote control from Lightcloud web application
• Communicates over secure wireless mesh network – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the Touch Lighting Control. The Touch is a wall-mounted touch screen that gives you switching, dimming and scene control for all your zones. This display measures a full 10″ and requires no internet access, communicating with other Lightcloud devices over a wireless mesh network.

• 10″ tablet for switching, dimming and scene control
• Wall-mounted, AC-Powered – never lose it, never charge it
• Customizable interface to show only the zones and scenes you want
• Communicates directly with other Lightcloud devices – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the 2 network bridge module DLM. The LMBC-300 Digital Network Bridge provides a segment network connection for a group of Digital Lighting Management (DLM) local network devices. This enables individual DLM local networks to be aggregated into a larger system, which, in turn, can be remotely managed from a DLM Segment Manager or a building automation system (BAS). Check out Wattstopper DLM products here.

FEATURES:

• Component of Digital Lighting Management integrated control systems
• Adds segment network functionality a to DLM local network
• Communicates all DLM local network data and device settings to a Segment Manager and/or LMCS software
• Easy integration with BAS through use of standard BACnet objects to represent DLM local network device settings and states
• Class 2 operation and plenum rated housing facilitate simple installation
• DIN rail mounting clamp provided with the unit to facilitate box or panel mounting
• UL 2043 plenum rated
• This product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the dual technology wall switch. LMDW-100 Series Digital Dual Technology Wall Switch Occupancy Sensors use PIR and ultrasonic technology to detect occupancy for energy-efficient control of lighting and plug loads. They also include one or two switch buttons for manual control of selected loads, and are part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1- and 2-button models; six color options
• Sensors may be used for multi-way control
• Each switch button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to raise or lower load levels
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• This product meets the materials restrictions of RoHS

This is the dual technology corner mount occupancy sensor. The LMDX-100 Digital Dual Technology Corner Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the Softswitch RF Relay Module. Check out the RadioRA 2 products page here.

• Lutron patented Softswitch technology prevents arcing of relay contacts, extending product lifetime.
• Various operating voltages available—refer to model number chart below for details on voltage requirements.
• Capable of switching 16 A of general-purpose loads.
• Utilizes Lutron Clear Connect RF Technology—refer to model number chart below for frequency band data and Lutron system compatibility.
• Mounts to an electrical junction box through a 1/2 in or 21 mm trade-size knockout opening.
• Complies with requirements for use in a compartment handling environmental air (plenum) per NECR 2011 300.22(C)(3) (LMJ- model only).