This is the RF wall switches. EOSW-100 Series RF Wall Switches work with EOPC-100 wireless occupancy sensors, and optional EORS-100 and EOHR-100 remote switches, to turn lights on and off based on occupancy. Models are available to control one or two switched legs in applications with or without neutral wires at the switch box. Both single and dual relay RF wall switches fit in single gang junction boxes for direct control of one or two loads. Each wall switch can be paired with one or more EOPC-100 wireless sensors for occupancy-based control. By default, single relay wall switches operate in manual-on/automatic-off mode. Dual relay switches are factory set for auto-on to 50%; relay 1 is automatic on/off, and relay 2 is manual-on/automatic-off. When occupancy is no longer detected and the time delay elapses, lights automatically turn off. These sequences of operation, and other default settings, may be changed using hidden configuration buttons. EOSW-100 RF dual relay switches allow for separate pairing of each controlled load (relay) to the integral switch buttons. Additionally, each load may be paired with selected wireless occupancy sensors and selected buttons on RF remote switches. The RF transmission range is approximately 50’ to 150’ depending on product placement. Check out Wattstopper DLM products here.

• RF wall switches work with EOPC-100 wireless occupancy sensors
• Zero-crossing for long relay life
• Choice of manual-on or auto-on operation
• EOSW-111 and EOSW-112 comply with 2011 NEC requirements
• Selectable time delay
• Test mode allows quick and easy set up
• Compatible with decorator wall plates

This is the outdoor motion sensor. Wattstopper’s EW outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, EW sensors perform reliably in all weather conditions.

EW sensors operate at line voltage and can be mounted onto a standard, outdoor junction box. Utilizing advanced PIR technology, the sensors detect the difference between infrared energy in motion and the background space to turn lighting on when a person or vehicle enters the coverage area. After the area is vacated and the time delay elapses, lighting automatically turns off. The EW’s dual PIR detectors and three level lens increase the detection density as well as the accuracy of motion detection. Check out Wattstopper DLM products here.

• Sensors can be mounted on walls, eaves, or ceilings for installation convenience
• 270° coverage
• Front rotates for easy coverage adjustment
• Precision, double-shot tooling with internal silicon gaskets prevents water and dust contamination
• No tools needed to aim or adjust lamp holders for speedier installation
• Optional override-ON to turn lights on remotely for the length of the time delay
• ON/OFF control based on daylight levels via adjustable light level setting
• Zero crossing circuitry reduces stress on the relay and results in increased sensor life
• ASIC enhances reliability and helps to eliminate false triggers
• Pulse Count Processing eliminates false triggers and provide RFI and EMI immunity
• Patented Voltage Drop Protection
• Solid state digital microprocessor offers increased reliability
• User-adjustable time delay from 12 seconds to 16 minutes

• Title 20/24 certified lighting control device
• Enables compliance with lighting control requirements in ASHRAE 90.1 and IECC

This is a Vive PowPak Wireless Fixture Control For Ecosystem. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Click here to see the Lutron Vive story.

HIGHLIGHTS:

• The Vive PowPak Wireless Fixture Control For Ecosystem Enables compliance with lighting control requirements in ASHRAE 90.1 and IECC.
• Lutron patented Clear Connect RF Technology works through walls and floors.
• Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
• Two-wire installation for any retrofit application.
• Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

• Title 20/24 certified lighting control device
• Enables compliance with lighting control requirements in ASHRAE 90.1 and IECC

This is the 1-gang decorator-style faceplate. The FP-G line of decorator-style faceplates from Crestron® is available in several designer colors with a smooth or textured finish. The faceplates are offered in 1-gang, 2-gang, 3-gang, and 4-gang styles to suit every installation need. Check out the Züm by Crestron products here.

This is the LC&D 4 relay blue box lighting control panel. Check out our Acuity products here.

• Master Lighting Control Panel in Surface Mount Enclosure
• Modem for Programming Support via Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 4 Relays
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is the LC&D 4 relay dimming blue box lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support by Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 4 Relays
• 0-10 Volt Dimming Control
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

LC&D GR1404LTD Blue Box Relay Panel

• Master Panel in Surface Mount Enclosure
• No modem
• Order Pre-Programmed for Easy No Hassle Installation (fees apply)
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 4 Relays (relays included)
• 0-10 Volt Dimming Control
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is a complete basic system and does not include modem or other accessories. For custom options check out our customizer here.

For more information visit the Acuity website here.

This is the LC&D 8 Relay Blue Box Lighting Control Panel GR1408LT. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Order Pre-Programmed for Easy No Hassle Installation. Click here to add to your cart.
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 8 Relays
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices
• Other options available! Request a quote on our chat box.

The LC&D 8 Relay Blue Box Lighting Control Panel GR1408LT is a cost effective, simple alternative to traditional time clocks, twist timers and contactor packages. The series comes in three enclosure sizes, each with a compact footprint. The Blue Box LT Series is ideal for small-to-medium projects, and arrives pre-assembled and ready for installation. The Master Panel may be networked with up to 16 digital devices including Remote relay panels, switches and photocell. The Master Panel has an input for an outdoor photosensor which may be programmed to control any relay(s) on the bus. The Blue Box LT Series is compatible with LC&D~8217;s GR 2400 system accessories. Blue Box LT remote panels may also be used on GR 2400 systems.

This is the LC&D 8 relay dimming blue box lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support via Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 8 Relays
• 0-10 Volt Dimming Control
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is the LC&D 16 relay blue box lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support via Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 16 Relays
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is the LC&D 16 relay dimming blue box lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support via Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 16 Relays
• 0-10 Volt Dimming Control
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices